Asus ROG RAMPAGE VI EXTREME OMEGA Users Manual English - Page 34
Internal connectors, Intel, X299 Serial ATA 6 Gb/s connectors 7-pin SATA6G_12, SATA 6G_34
![]() |
View all Asus ROG RAMPAGE VI EXTREME OMEGA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 1 1.1.9 Internal connectors 1. Intel® X299 Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA 6G_34, SATA 6G_56) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® X299 chipset. • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST Premium With Intel Optane System Acceleration (RAID)]. • Due to the way Intel® reads drive numbers based on the PCH pinout, the SATA drive naming on the IRST driver will be shifted by 2 (i.e. SATA_1 will be reported as internal empty port 3. 1-18 Chapter 1: Product Introduction
![](/manual_guide/products/asus-rog-rampage-vi-extreme-omega-users-manual-english-afea0bf/34.png)