Asus ROG-STRIX-650G ROG-STRIX PSU Quick Starter Guide - Page 4
English, Installing your ROG STRIX Power Supply Unit
View all Asus ROG-STRIX-650G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
English Installing your ROG STRIX Power Supply Unit Before installing or removing cables, ensure that the system is turned off, and all power cables for the system and all attached devices are unplugged. 1. Follow the directions of your chassis manual and secure your ROG STRIX power supply unit into your chassis using the mounting screws. 2. Connect the bundled cables to your ROG STRIX power supply unit. 3. Connect the power connectors to your motherboard and peripheral devices according to your preference. You may refer to the list below to check which devices each power connector can be connected to. • The power connectors may vary between different models of ROG STRIX Power Supply Units. • Refer to your motherboard's user manual for more information on the location and connecting the power connectors mentioned below. • Connect the 24-pin or 20-pin Main Power Connector to the motherboard's 24-pin or 20-pin power connector. • Connect the 4+4 pin CPU +12V Power Connector to the CPU power socket on the motherboard. • Connect the 4-pin Peripheral Power Connector to peripheral devices if needed. • Connect the 6+2 pin PCI-E +12V Power Connector to the PCI-E graphics card. • Connect the SATA Power Connector to devices with a Serial ATA interface. 4. Connect your ROG STRIX Power Supply Unit to a power source using the bundled power cord. 5. Flip the Power Switch to the "I" position to turn on your power supply unit ON OFF O dB Fan 4 ROG STRIX PSU