Asus ROG STRIX B250I GAMING User Guide - Page 62
APM Configuration, 3.6.9 Network Stack Configuration, 3.6.10 HDD/SSD SMART Information
View all Asus ROG STRIX B250I GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Intel LAN Controller [Enabled] [Enabled] Enables the Intel® LAN controller. [Disabled] Disables the controller. 3.6.8 APM Configuration ErP Ready [Disabled] Allows BIOS to switch off some power at S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options will be switched off. Configuration options: [Enable(S4+S5)] [Enable(S5)] [Disabled] 3.6.9 Network Stack Configuration The items in this menu allow you to configure Ipv4 / Ipv6 PXE support. 3.6.10 HDD/SSD SMART Information This menu displays the SMART information of the connected devices. 3.6.11 USB Configuration The items in this menu allow you to change the USB-related features. The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None. USB Single Port Control This item allows you to enable or disable the individual USB ports. Refer to section 1.1.2 Motherboard layout for the location of the USB ports. 3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Q-Fan Configuration The subitems in this menu allow you to configure the Q-Fan features. Qfan Tuning Click this item to automatically detect the lowest speed and configure the minimum duty cycle for each fan. Chapter 3 3-14 Chapter 3: BIOS Setup