Asus ROG STRIX X299-XE GAMING User Guide - Page 37
AURA RGB header 4-pin RGB_HEADER1, RGB_HEADER2, These connectors are for RGB LED strips.
View all Asus ROG STRIX X299-XE GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
11. AURA RGB header (4-pin RGB_HEADER1, RGB_HEADER2) These connectors are for RGB LED strips. Chapter 1 • The RGB header supports 5050 multi-color LED strips (+12V/G/R/B), with a maximum power rating of 3A (12V), and no longer than 3 m. • Ensure that the RGB LED extension cable and the RGB LED strip is connected in the correct orientation, and the +12V connector is aligned with the +12V header on the motherboard. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • Actual lighting and color will vary with LED strip. • The lighting effects may be customized with the help of AURA software. • If your LED strip does not light up, check if the RGB LED extension cable and the RGB LED strip is connected in the correct orientation, and the 12V connector is aligned with the 12V header on the motherboard. • The LED strip will only light up when the system is operating. • The LED strips are purchased separately. ROG STRIX X299-XE GAMING 1-21