Asus ROG STRIX Z370-H GAMING User Guide - Page 71
PCH Configuration, PCI Express Configuration, SATA Controllers, SATA Mode Selection
View all Asus ROG STRIX Z370-H GAMING manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
3.6.4 PCH Configuration The items in this menu allow you to adjust the PCH PCI Express speed. PCI Express Configuration This item allows you to configure the PCI Express slots. PCIe Speed This item allows your system to automatically select the PCI Express port speed. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] 3.6.5 PCH Storage Configuration While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. SATA Controller(s) This item allows you to enable or disable the SATA Device. Configuration options: [Enabled] [Disabled] The following items appear only when you set the SATA Controller(s) to [Enabled]. SATA Mode Selection This item allows you to set the SATA configuration. [AHCI] [Intel RST Premium With Intel Optane System Acceleration(RAID)] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. Set to [Intel RST Premium With Intel Optane System Acceleration(RAID)] when you want to create a RAID configuration from the SATA hard disk drives. S.M.A.R.T. Status Check S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks. Configuration options: [On] [Off] Chapter 3 ROG STRIX Z370-H GAMING 3-17