Asus RS520-E8-RS8 V2 User Guide - Page 36
Hard disk drives, 2.4.1 Installing a 3.5-inch HDD
View all Asus RS520-E8-RS8 V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2.4 Hard disk drives The system supports 8 (RS520-E8-RS8 V2) or 12 (RS520-E8-RS12-EV2) hot-swap 3.5-inch SATAII/SAS hard disk drives. Two hot-swap 2.5-inch hard disk drives are supported on the rear panel of RS520-E8-RS12-EV2. The hard disk drive installed on the drive tray connects to the motherboard SATAII/SAS ports via SATAII/SAS backplane. 2.4.1 Installing a 3.5-inch HDD To install a 3.5-inch HDD: 1. Press the spring lock to release to the tray lever. 2. Firmly hold the tray lever then pull the drive tray out of the bay. 2 3. Slide the HDD into the drive tray with the SATA port facing towards the back of the expansion slot. Ensure that the screw holes on the HDD matches the screw holes on the tray. Tray lever 1 Spring lock 4. Secure the HDD in the HDD tray with four screws (two on each side). 2-12 Chapter 2: Hardware Information