Asus RS720-E6 RS12 User Guide - Page 45

Attaching the rack rails, Fasten the eight screw you secure

Get Asus RS720-E6 RS12 PDF manuals and user guides View all Asus RS720-E6 RS12 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

3.1.2 Attaching the rack rails To attach the rack rails 1. Place the two front rail rack joints into the rear rail rack slots, as shown in the following figure. 2. Attach the front and rear rail racks with eight screws and nuts, as shown in the following figure. Do not secure the screws too tight so that you can still adjust the length of the rack rails to meet the depth of the server rack. Rear rail rack Front rail rack Front rail rack joints Rear rail rack slots 3. Select two units of space (2U) on the rack where you want to install the barebone server. 4. Measure the depth of the rack to determine the length of the rack rails. 5. Adjust the rack rail to ensure that it fits the rack. 6. Position the rack rail to the 2U space on the rack. Ensure that the front end of the rack rail goes to the front of the rack space. 7. Secure the front end of the rail with two rack screws, as shown in the right figure. 8. Secure the rear end of the rail with two rack screws, as shown in the 7 right figure. 9. Fasten the eight screw you secure in step 2, as shown in the right figure. 10. Repeat steps 6 to 9 to assemble and attach the rack rail on the other 8 side. 9 8 9 7 ASUS RS720-E6/RS12 3-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
3-3
ASUS RS720-E6/RS12
3.1.2
Attaching the rack rails
To attach the rack rails
1.
Place the two front rail rack joints into the rear rail rack slots, as shown in the
following figure.
2.
Attach the front and rear rail racks with eight screws and nuts, as shown in
the following figure. Do not secure the screws too tight so that you can still
adjust the length of the rack rails to meet the depth of the server rack.
Front rail rack
Rear rail rack
Front rail rack joints
Rear rail rack slots
7.
Secure the front end of the rail with
two rack screws, as shown in the
right figure.
8.
Secure the rear end of the rail with
two rack screws, as shown in the
right figure.
9.
Fasten the eight screw you secure
in step 2, as shown in the right
figure.
10.
Repeat steps 6 to 9 to assemble
and attach the rack rail on the other
side.
3.
Select two units of space (2U) on the rack where you want to install the
barebone server.
4.
Measure the depth of the rack to determine the length of the rack rails.
5.
Adjust the rack rail to ensure that it fits the rack.
6.
Position the rack rail to the 2U space on the rack. Ensure that the front end of
the rack rail goes to the front of the rack space.
7
9
8
7
9
8