Asus RT-AC3100 ASUS RT-AC3100 user s manual in English - Page 113
How to restore the system to its default settings?, Firmware upgrade failed.
View all Asus RT-AC3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
How to restore the system to its default settings? • Go to Administration > Restore/Save/Upload Setting, and click Restore. The following are the factory default settings: User Name: Password: admin admin Enable DHCP: IP address: Yes (if WAN cable is plugged in) 192.168.1.1 Domain Name: (Blank) Subnet Mask: 255.255.255.0 DNS Server 1: DNS Server 2: 192.168.1.1 (Blank) SSID (2.4GHz): ASUS SSID (5GHz): ASUS_5G Firmware upgrade failed. Launch the rescue mode and run the Firmware Restoration utility. Refer to section 5.2 Firmware Restoration on how to use the Firmware Restoration utility. 113
113
How to restore the system to its default settings?
•
Go to
Administration
>
Restore/Save/Upload Setting
, and
click
Restore
.
The following are the factory default settings:
User Name:
admin
Password:
admin
Enable DHCP:
Yes (if WAN cable is plugged in)
IP address:
192.168.1.1
Domain Name:
(Blank)
Subnet Mask:
255.255.255.0
DNS Server 1:
192.168.1.1
DNS Server 2:
(Blank)
SSID (2.4GHz):
ASUS
SSID (5GHz):
ASUS_5G
Firmware upgrade failed.
Launch the rescue mode and run the Firmware Restoration utility.
Refer to section
5.2 Firmware Restoration
on how to use the
Firmware Restoration utility.