Asus RT-N10 D1 users manual - Page 10

What you need, Setting up your wireless router

Page 10 highlights

What you need To set up your network, you need one or two computers that meet the following system requirements: • Ethernet RJ-45 (LAN) port (10Base-T/100Base-TX) • IEEE 802.11b/g/n wireless capability • An installed TCP/IP service • Web browser such as Microsoft Internet Explorer, Mozilla Firefox, Apple Safari, or Google Chrome • If your computer does not have built-in wireless capabilities, install an IEEE 802.11b/g/n WLAN adapter to your computer to connect to the network. • The Ethernet RJ-45 cables used to connect the network devices should not exceed 100 meters. Setting up your wireless router The ASUS RT-N10 uses a web Graphical User Interface (GUI) to configure wireless router settings. You can set up the wireless router to use any of these three operation modes: • Router mode (IP Sharing) • Repeater mode • Access Point (AP) mode You can configure your wireless router to use an operation mode via the Quick Internet Setup (QIS). 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

10
What you need
To set up your network, you need one or two computers that meet
the following system requirements:
Ethernet RJ-4² (LAN) port (10Base-T/100Base-TX)
IEEE 80±.11b/g/n wireless capability
An installed TCP/IP service
Web browser such as Microsoft Internet Explorer, Mozilla
Firefox, Apple Safari, or Google Chrome
• If your computer does not have built-in wireless capabilities,
install an IEEE 80±.11b/g/n WLAN adapter to your computer
to connect to the network.
• The Ethernet RJ-4² cables used to connect the network
devices should not exceed 100 meters.
Setting up your wireless router
The ASUS RT-N10 uses a web Graphical User Interface (GUI) to
configure wireless router settings. You can set up the wireless
router to use any of these three operation modes:
Router mode (IP Sharing)
Repeater mode
Access Point (AP) mode
You can configure your wireless router to use an operation mode
via the Quick Internet Setup (QIS).