Asus S-presso Spresso User Manual

Asus S-presso Manual

Get Asus S-presso PDF manuals and user guides View all Asus S-presso manuals
Add to My Manuals
Save this manual to your list of manuals

Asus S-presso manual content summary:

  • Asus S-presso | Spresso User Manual - Page 1
    ® S-presso Multimedia System User Guide Hardware Information
  • Asus S-presso | Spresso User Manual - Page 2
    COMPUTER INC. All Rights Reserved. No part of this manual, ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL
  • Asus S-presso | Spresso User Manual - Page 3
    2.2 Before you proceed 2-2 2.3 Removing the front panel 2-3 2.4 Removing the cover 2-4 2.5 Removing the power supply unit 2-5 2.6 Installing a CPU 2-6 2.6.1 Removing the CPU fan and heatsink assembly ....... 2-6 2.6.2 CPU installation 2-7 2.6.3 Re-installing the CPU fan and heatsink assembly
  • Asus S-presso | Spresso User Manual - Page 4
    12 Re-installing the power supply unit 2-17 2.11.1 Voltage selector 2-18 2.11.2 Power supply specifications 2-19 Replacing the cover 2-20 Connecting external devices 2-21 Chapter 3: Motherboard info 3.1 Introduction 3-2 3.2 Motherboard layout 3-2 3.3 Jumper 3-3 3.4 Connectors 3-4 Chapter
  • Asus S-presso | Spresso User Manual - Page 5
    5-2 5.3 Support CD information 5-3 5.3.1 Running the support CD 5-3 5.3.2 Drivers menu 5-4 5.3.3 Utilities menu 5-5 5.3.4 ASUS contact information 5-6 5.3.5 Other information 5-6 5.4 Software information 5-8 5.4.1 ASUS Update 5-8 5.4.2 ASUS PC Probe 5-10 5.4.3 Multi-channel audio feature
  • Asus S-presso | Spresso User Manual - Page 6
    for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are and used in accordance with manufacturer's instructions, may cause harmful interference to radio determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
  • Asus S-presso | Spresso User Manual - Page 7
    If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or problems with the product, contact a qualified service technician or your retailer. Lithium-Ion Battery Warning C A U T I O N: Danger of explosion if battery is incorrectly replaced. Replace
  • Asus S-presso | Spresso User Manual - Page 8
    Safeguards About this guide Audience This guide provides general information and installation instructions about the ASUS S-presso. This guide is intended for experienced users and integrators with hardware knowledge of personal computers. How this guide is organized 1. Chapter 1: System
  • Asus S-presso | Spresso User Manual - Page 9
    Conventions used in this guide W A R N I N G : ASUS hardware and software products. Refer to the ASUS contact information. 2. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part
  • Asus S-presso | Spresso User Manual - Page 10
    Support CD • ASUS Instant On CD • ASUS Home Theater CD 4 . Documentation • User guide (Hardware Information) • User guide (Software Information) 5 . Remote controller 6 . Power supply unit 7 . Optional items • Optical drive • Hard disk drive • ASUS PVR-416 TV/FM card S-presso Models S1-P111 S1-P112
  • Asus S-presso | Spresso User Manual - Page 11
    System Introduction Chapter 1 This chapter gives a general description of the ASUS S-presso. The chapter lists the system features including introduction on the front and rear panels, and internal components. ASUS S-presso barebone system
  • Asus S-presso | Spresso User Manual - Page 12
    own desktop. The ASUS S-presso is a smart personal computer and a versatile home entertainment system in one. Powered by the ASUS P4P8T motherboard, S-presso delivers robust technology for your computing and multimedia entertainment needs. S-presso supports the Intel® Pentium® 4 processor with up to
  • Asus S-presso | Spresso User Manual - Page 13
    d o o r . Inside this door are the front panel input/ output ports. 7 . S y s t e m p o w e r b u t t o n . Press this button to exit Instant On. The system then powers on and enters the S-presso operating system. 8 . P L A Y / P A U S E s e n s o r . Plays the audio CD/DVD or DVD/VCD in the optical
  • Asus S-presso | Spresso User Manual - Page 14
    this sensor to turn on the S-presso Instant On feature. The Instant On feature allows you to play DVD/VCD movie, CD audio tracks, or MP3 files without entering the S-presso operating system. 1 1 . M system/CPU temperature is beyond normal range. 1 6 . V o l u m e L E D. Rotating LED displays
  • Asus S-presso | Spresso User Manual - Page 15
    several I/O ports are located inside the internal front panel doors. Press the access buttons to open the internal front panel doors. S1-P111 17 18 19 20 21 22 23 24 25 26 Front panel (open) 1 7 . S e c u r e D e . This is an optional DVD-ROM/CD-RW/DVD-RW drive. ASUS S-presso barebone system 1-5
  • Asus S-presso | Spresso User Manual - Page 16
    panel The S-presso rear panel includes the power socket and several I/O ports that allow convenient connection of devices. 6 1 7 8 2 3 9 4 10 5 11 12 13 14 15 16 17 18 1 . P o w e r s u p p l y u n i t f a n . This fan provides ventilation inside the power supply becomes Front Speaker Out
  • Asus S-presso | Spresso User Manual - Page 17
    Audio ports function variation Port Light Blue Lime Pink Headphone/2-Channel Line In Line Out Mic In 4-Channel No function Front Speaker Out Surround 6-Channel LFE Output*/Center Front . 1 8 . P C I s l o t c o v e r . Remove this cover to install a PCI card. ASUS S-presso barebone system 1-7
  • Asus S-presso | Spresso User Manual - Page 18
    of the system when you remove the top cover. The installed components are labeled for your reference. Proceed to Chapter 2 for instructions on installing other system components. 1 2 3 4 5 6 7 8 1. Optical drive bay 2. HDD drive bay 3. Storage card slot 4. I/O slot 5. DIMM sockets 6. Fan and
  • Asus S-presso | Spresso User Manual - Page 19
    For details, refer to the S o f t w a r e I n f o r m a t i o n user guide. 1 23 45 6 7 8 9 10 11 12 1. T V i c o n - This icon lights up when you are computer. 7 . F M i c o n - This icon lights up when you are in FM mode, which allows you to listen to FM radio. ASUS S-presso barebone system 1-9
  • Asus S-presso | Spresso User Manual - Page 20
    is powered off, in soft-off or stand-by mode, S3 (Suspend-to-RAM), or S4 (Suspend-to-Disk) state, this displays the system time. The panel displays the system time in 24-hour format. Enter the BIOS setup or the S-presso operating system to adjust the time. In Instant On, this displays the current
  • Asus S-presso | Spresso User Manual - Page 21
    Basic installation Chapter 2 This chapter provides step-by-step instructions on how to install components in the system. ASUS S-presso barebone system
  • Asus S-presso | Spresso User Manual - Page 22
    power supply case, before handling components to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them. • Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component. The motherboard
  • Asus S-presso | Spresso User Manual - Page 23
    pull towards you until the lower portion disengages from the chassis. Do not use excessive force to avoid breaking the front panel. 4 Slightly pull the side and top portions to completely release the front panel from the chassis. 5. Set the front panel aside. ASUS S-presso barebone system 2-3
  • Asus S-presso | Spresso User Manual - Page 24
    2.4 Removing the cover To remove the cover: 1. On the rear panel, locate the thumbscrew that secures the cover to the chassis. 2. Turn the thumbscrew counterclockwise unti it gets loose. The thumbscrew cannot be removed from the
  • Asus S-presso | Spresso User Manual - Page 25
    power supply unit You must remove the power supply unit (PSU) before you can install a central processing unit (CPU) and other system components. To remove the PSU: 1. Disconnect the power plugs on the motherboard. 2. Locate the lever that secures the PSU. 3. Push down the lever to release the PSU
  • Asus S-presso | Spresso User Manual - Page 26
    2.6 Installing a CPU The motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF) socket. This socket is designed for an Intel® Pentium® 4 processor with up to 3.4 GHz core frequency and 800 MHz FSB. 2.6.1 Removing the CPU fan and heatsink assembly The system package includes a pre-
  • Asus S-presso | Spresso User Manual - Page 27
    that its marked corner (gold mark) matches the base of the socket lever. 5. Carefully insert the CPU into the socket until it fits in place. 6. Push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked. 4 5 3 2 1 ASUS S-presso barebone system 2-7
  • Asus S-presso | Spresso User Manual - Page 28
    fan and heatsink assembly To re-install the CPU fan and heatsink assembly: 1. Position the CPU fan and heatsink assembly on top of the installed CPU. 2. Using a Phillips screw driver, secure the CPU fan and heatsink assembly to the motherboard with the four screws your removed earlier. 3. Connect
  • Asus S-presso | Spresso User Manual - Page 29
    memory modules from the same vendor. • This motherboard only supports x4, x8, x16 chips per module DDR DIMMs. • Make sure that the memory frequency matches the CPU FSB (Front Side Bus). Refer to the Memory frequency/CPU FSB synchronization table on the next page. ASUS S-presso barebone system 2-9
  • Asus S-presso | Spresso User Manual - Page 30
    Memory frequency/CPU FSB synchronization The system motherboard supports different memory frequencies depending on the CPU FSB (Front Side Bus) and the type of DDR DIMM. CPU FSB 800 MHz 533 MHz 400 MHz DDR DIMM Type PC3200/PC2700*/PC2100 PC2700/PC2100 PC2100 Memory Frequency 400/333*/266 MHz 333/
  • Asus S-presso | Spresso User Manual - Page 31
    . The P4P8T motherboard does not support 3.3V AGP cards. Unplug the power cord before adding or removing expansion cards. Failure to do so can cause you physical injury and damage the motherboard. P4P8T ® P4P8T Accelerated Graphics Port (AGP) Keyed for 1.5v ASUS S-presso barebone system 2-11
  • Asus S-presso | Spresso User Manual - Page 32
    towards the direction of the arrow. 2 3 4. Align the card connector with the slot and press firmly until the card is completely seated in the slot. 5. Replace the hinge lock to secure the card to the chassis. 6. Press down firmly until the hinge lock snaps in place. 6 5 2-12 Chapter 2: Basic
  • Asus S-presso | Spresso User Manual - Page 33
    13 Numeric Data Processor 14* Primary IRQ assignments for this motherboard A B CDE drivers support "Share IRQ" or that the cards do not need IRQ assignments; otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. ASUS S-presso barebone
  • Asus S-presso | Spresso User Manual - Page 34
    cable and power plug. Refer to the optical drive documentation on how to set the drive as a Slave device. To install an optical drive: 1. Drive a screw on each side of the optical drive as shown. 2. Remove the front panel. Refer to section "2.3 Removing the front panel" for instructions. 3. Slide
  • Asus S-presso | Spresso User Manual - Page 35
    connector labeled SEC_IDE) on the motherboard. See page 3-8 for the location of the secondary IDE connector. 9. Connect the other end of the audio cable to the 4-pin CD1 connector on the motherboard. See page 3-8 for the location of the CD audio connector. 5 6 7 ASUS S-presso barebone system 2-15
  • Asus S-presso | Spresso User Manual - Page 36
    the IDE connector on the drive. 6. Connect a 4-pin power plug from 5 the power supply unit to the HDD power connector. 7. Connect the other end of the IDE ribbon cable to the primary 6 IDE connector (blue connector labeled PRI_IDE) on the motherboard. See page 3-8 for the location of the
  • Asus S-presso | Spresso User Manual - Page 37
    grooves. 2. Slide the PSU toward the direction of the rear panel until it fits in place. 3. Connect the power plugs to the connectors on the motherboard. See next page for details. Make sure that the PSU cables do not interfere with the CPU and/or chassis fans. ASUS S-presso barebone system 2-17
  • Asus S-presso | Spresso User Manual - Page 38
    location of these connectors. 2.11.1 Voltage selector The PSU has a 115 V/230 V voltage selector switch located beside the power connector. Use this switch to select the appropriate voltage according to the voltage supply in your area. If the voltage supply in your area is 100-127 V, set the switch
  • Asus S-presso | Spresso User Manual - Page 39
    Power supply specifications power should not exceed 220 W. • The maximum combined load on +5 V and +3.3 V outputs should not exceed 80 W. • The maximum peak total DC output power should not exceed 225 W. • Peak +12 VDC output power should not exceed a duration of 12 seconds. ASUS S-presso barebone
  • Asus S-presso | Spresso User Manual - Page 40
    Output ripple Parameter +3.3 V +5 V +12 V -12 V +5 VSB Ripple & Noise Max 100 100 150 150 100 Unit mVp-p mVp-p mVp-p mVp-p mVp-p 2.11 Replacing the cover To replace the cover: 1. Push down the top cover. 2.. Push to the direction of the arrow until the rear portion of the cover aligns with the
  • Asus S-presso | Spresso User Manual - Page 41
    3. Tighten the screw by turning it clockwise to secure the cover to the rear panel. 2.12 Connecting external devices To the front panel S1-P111 Headphone Mic Scanner ASUS S-presso barebone system 2-21
  • Asus S-presso | Spresso User Manual - Page 42
    To the rear panel PS/2 mouse Printer Power outlet RJ-45 PS/2 KB VGA monitor Line Out Line In Mic USB USB mouse printer Audio devices 2-22 Chapter 2: Basic installation
  • Asus S-presso | Spresso User Manual - Page 43
    Motherboard info Chapter 3 This chapter gives information about the motherboard that comes with the system. This chapter includes the motherboard layout, jumper settings, and connector locations. ASUS S-presso barebone system
  • Asus S-presso | Spresso User Manual - Page 44
    3.1 Introduction The ASUS P4P8T motherboard comes already installed in the ASUS S-presso barebone system. This chapter provides technical information about the motherboard for future upgrades or system reconfiguration. 3.2 Motherboard layout 24.89cm (9.8in) ATX Power Connector Super I/O PS/2 T:
  • Asus S-presso | Spresso User Manual - Page 45
    . To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Remove the battery. 3. Move the jumper cap P4P8T ® P4P8T Clear RTC RAM CLRTC 12 23 Normal (Default) Clear CMOS The system automatically turns on when you clear the CMOS after first reboot. ASUS S-presso barebone
  • Asus S-presso | Spresso User Manual - Page 46
    with USB 2.0 specification that supports up to 480 Mbps connection speed. USB Power USBP2- USBP2+ GND NC P4P8T ® P4P8T USB connector 1 5 USB56 6 10 USB Power USBP3- USBP3+ GND USB78 1 P4P8T ® P4P8T USB connector USB Power USBP2- USBP2+ GND +5V Power Botton USB Power USBP3- USBP3
  • Asus S-presso | Spresso User Manual - Page 47
    front panel audio I/O module that supports AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. Line out_L NC Line out_R MICPWR MIC2 BLINE_OUT_L BLINE_OUT_R +5VA AGND P4P8T ® FP_AUDIO P4P8T Front panel audio connector ASUS S-presso barebone
  • Asus S-presso | Spresso User Manual - Page 48
    connectors support cooling fans of 350 m A ~ 2000 mA (24 W max.) or a total of 1 A ~ 3.48 A (41.76 W max) at +12 V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. P4P8T ® P4P8T Fan connectors
  • Asus S-presso | Spresso User Manual - Page 49
    +5V Standby Power Good Ground +5.0 Volts Ground +5.0 Volts Ground +3.3 Volts +3.3 Volts P4P8T ® P4P8T ATX power connector ATX12V +12V DC Ground +5.0 Volts +5.0 Volts -5.0 Volts Ground Ground Ground Power Supply On Ground -12.0Volts +3.3Volts +12V DC Ground ASUS S-presso barebone system 3-7
  • Asus S-presso | Spresso User Manual - Page 50
    allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. AUX1 (White) CD1 (Black) Right Audio Channel Ground Left Audio Channel Right Audio Channel Ground Left Audio Channel P4P8T ® P4P8T Internal audio connectors 3-8 Chapter 3: Motherboard info
  • Asus S-presso | Spresso User Manual - Page 51
    P4P8T ® P4P8T SATA connectors You must install Windows® 2000 Service Pack 4 or the Windows® XP Service supported by Intel ICH5 specifications. N a t i v e operating systems (OS) are Windows® 2000/XP. ICH5 supports (1 device) - - Legend: Supported - Disabled ASUS S-presso barebone system 3-9
  • Asus S-presso | Spresso User Manual - Page 52
    the front panel to support a Compact Flash card. P4P8T ® P4P8T J1 connector J1 ODJ VOLUP ODJ VOLDN ODJ SCANRW ODJ SCANFW PB ODJ STOP# RAUSE ODJ PLAY GND 10. LCD panel connector (24-1-pin LCD_PANEL) This connector is for the LCD panel on the front panel of the S1-P111 model. P4P8T ® P4P8T
  • Asus S-presso | Spresso User Manual - Page 53
    11. System panel connector (8-1 pin PANEL) This connector accommodates several system front panel functions. IDE_LED Power LED IDE_LEDIDE_LED+ PLEDPLED+ PANEL Ground PWR P4P8T ® P4P8T System panel connector ATX Power Switch* * Requires an ATX power supply. • System power LED (2-pin PLED)
  • Asus S-presso | Spresso User Manual - Page 54
    3-12 Chapter 3: Motherboard info
  • Asus S-presso | Spresso User Manual - Page 55
    Chapter 4 This chapter tells how to change system settings through the BIOS Setup menus and describes the BIOS parameters. BIOS information ASUS S-presso barebone system 1
  • Asus S-presso | Spresso User Manual - Page 56
    b l e f l o p p y d i s k in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the AFUDOS or the ASUS Update utilities. • A w o r k i n g B I O S f i l e for this motherboard is in the support CD. Use this file only when you do not have a copy of the original
  • Asus S-presso | Spresso User Manual - Page 57
    ) to store the file. A:\>afudos /oMYBIOS03.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash ..... done A:\> When the BIOS copy process is complete, the utility returns to the DOS prompt. ASUS S-presso barebone system 4-3
  • Asus S-presso | Spresso User Manual - Page 58
    asus.com) to download the latest BIOS file for your motherboard. Save the BIOS file to a bootable floppy disk. Write down the BIOS file name to a piece of paper. You need to type the e x a c t B I O S f i l e n a m e at the prompt. 2. Copy the AFUDOS.EXE utility from the support screen displays the
  • Asus S-presso | Spresso User Manual - Page 59
    AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file ..... done Erasing flash .... done Writing flash .... 0x0008CC00 (9%) Verifying flash .. done A:\> 5. Reboot the system from the hard disk. ASUS S-presso barebone system 4-5
  • Asus S-presso | Spresso User Manual - Page 60
    floppy disk and using a DOS-based utility. The EZ Flash is built-in the BIOS LPC chip so it is accessible by simply pressing + during the Power-On Self Tests (POST). To update the BIOS using ASUS EZ Flash: 1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for your
  • Asus S-presso | Spresso User Manual - Page 61
    ... Checking for floppy... Floppy found! Reading file "p4p8t.rom". Completed. Start flashing... DO NOT shut down or reset the system while updating the BIOS! Doing so may cause system boot failure! 4. When the BIOS update process is complete, reboot the system. ASUS S-presso barebone system 4-7
  • Asus S-presso | Spresso User Manual - Page 62
    CD in the optical drive. The support CD contains the original BIOS for this motherboard. Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found. Reading file "p4p8t.rom". Completed. Start flashing... DO NOT shut down or reset the
  • Asus S-presso | Spresso User Manual - Page 63
    BIOS in Windows® environment. This utility is available in the support CD that comes with the motherboard package. ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP). To install ASUS Update: 1. Place the support CD in the optical drive. The
  • Asus S-presso | Spresso User Manual - Page 64
    you selected updating/ downloading from the Internet, select the ASUS FTP site nearest you to avoid network traffic, or choose A u t o S e l e c t. Click N e x t. 4. From the FTP site, select the BIOS version that you wish to download. Click N e x t. 5. Follow the screen instructions to complete the
  • Asus S-presso | Spresso User Manual - Page 65
    the Setup utility. When you start up the computer, the system provides you with the opportunity to run this program. Press during the Power-On Self Test (POST) to enter the Setup utility, otherwise, may not exactly match what you see on your screen. ASUS S-presso barebone system 4-11
  • Asus S-presso | Spresso User Manual - Page 66
    System Information [11:10:19] [Tue, 06/29/2004] [English] [Maxtor 6Y080L0] [ASUS CDS520/] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Use [ENTER], [ For changing the advanced system settings Power For changing the advanced power management (APM) configuration Boot For
  • Asus S-presso | Spresso User Manual - Page 67
    . Press U p / D o w n a r r o w k e y s or P a g e U p / P a g e D o w n k e y s to display the other items on the screen. Pop-up window 4.2.9 General help Scroll bar At the top right corner of the menu screen is a brief description of the selected item. ASUS S-presso barebone system 4-13
  • Asus S-presso | Spresso User Manual - Page 68
    IDE Slave Third IDE Master Fourth IDE Master IDE Configuration System Information [11:10:19] [Tue, 06/29/2004] [English] [Maxtor 6Y080L0] [ASUS CDS520/] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure
  • Asus S-presso | Spresso User Manual - Page 69
    are not user-configurable. specifically configuring a CD-ROM drive. Select ARMD (ATAPI Removable Media supports multi-sector transfer feature. When set to Disabled, the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] ASUS S-presso barebone
  • Asus S-presso | Spresso User Manual - Page 70
    IDE devices installed in the system. Select an item then press to configure the item. IDE Configuration Onboard IDE Operate Mode Enhanced Mode Support On IDE Detect Time Out (Sec) [Enhanced Mode] [S-ATA] [35] Set [Compatible Mode] when Legacy OS (i.e. WIN ME, 98, NT4.0, MS DOS) is used
  • Asus S-presso | Spresso User Manual - Page 71
    : Intel(R) Celeron(R) CPU 1.70GHz : 1700MHz :1 System Memory Size : 120MB AMI BIOS This item displays the auto-detected BIOS information. Processor This item displays the auto-detected CPU specification. System Memory This item displays the auto-detected system memory. ASUS S-presso barebone
  • Asus S-presso | Spresso User Manual - Page 72
    Chipset Onboard Devices Configuration PCI PnP USB Configuration Load MiniLoader [Disabled] Configure CPU. 4.4.1 CPU Configuration The items in this menu show the CPU-related information auto-detected by BIOS. Configure advanced CPU settings Manufacturer Brand String Frequency FSB Speed : Intel
  • Asus S-presso | Spresso User Manual - Page 73
    allow you to change the advanced chipset settings. Select an item then press to display the sub-menu. Advanced Chipset settings WARNING: Setting wrong values a precharge command to the DDR SDRAM. Configuration options: [4 Clocks] [3 Clocks] [2 Clocks] ASUS S-presso barebone system 4-19
  • Asus S-presso | Spresso User Manual - Page 74
    ] [CRT] [TV] [EFP] [LFP] [CRT+EFP] [CRT+LFP] Flat Panel Display [640x480LVDS] Allows you to select the flat panel display resolution when you selected LCD Flat Panel [LFP] as your boot display device. Configuration options: [640x480LVDS] [800x600LVDS] [1024x768LVDS] [1280x1024LVDS] [1400x1050LVDS
  • Asus S-presso | Spresso User Manual - Page 75
    you to select the TV standard when you selected TV as your boot display device. Configuration options: [Auto] [NTSC_M] [NTSC_M_J] [NTSC_433] [1.4] [1.1] 4.4.3 Onboard Devices Configuration OnBoard AC'97 Audio OnBoard LAN OnBoard LAN Boot ROM Parallel Port Address ASUS S-presso barebone system 4-21
  • Asus S-presso | Spresso User Manual - Page 76
    Parallel Port Address [378] Allows you to select the Parallel Port base addresses. Configuration options: [Disabled] [378] [278] Parallel Port Mode [EPP+ECP] Allows you to select the Parallel Port mode. Configuration options: [Normal] [EPP] [ECP] [EPP+ECP] EPP Version [1.9] Allows selection of the
  • Asus S-presso | Spresso User Manual - Page 77
    ISA graphics device is installed in the system so that the latter can function correctly. Setting to [Disabled] deactivates this feature. Configuration options: [Disabled] [Enabled] ASUS S-presso barebone system 4-23
  • Asus S-presso | Spresso User Manual - Page 78
    [Disabled] [Enabled] IRQxx [Available] When set to [Available], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved Enter> to display the configuration options. USB Configuration Module Version : 2.22.4-5.3 USB Devices Enabled : None USB Function Legacy USB Support USB 2.0
  • Asus S-presso | Spresso User Manual - Page 79
    Emulation Type items appear only when USB storage devices are installed. 4.4.6 Load MiniLoader [Disabled] Enable this item if you want the system to always enter Instant ON. Configuration options: [Enabled] [Disabled] ASUS S-presso barebone system 4-25
  • Asus S-presso | Spresso User Manual - Page 80
    . Configuration options: [S1 (POS) Only] [S3 Only] [Auto] 4.5.2 Repost Video on S3 Resume [No] Determines whether to invoke VGA BIOS POST on S3/STR resume. Configuration options: [No] [Yes] 4.5.3 ACPI 2.0 Support [No] Allows you to add more tables for ACPI 2.0 specifications. Configuration options
  • Asus S-presso | Spresso User Manual - Page 81
    power loss. Configuration options: [Power Off] [Power On] Power On By PS/2 Devices [Disabled] Allows you to use specific keys on the keyboard or the mouse to turn on the system. This feature requires an ATX power supply Configuration options: [Disabled] [Enabled] ASUS S-presso barebone system 4-27
  • Asus S-presso | Spresso User Manual - Page 82
    CPU Temperature CPU Fan Speed Chassis Fan Speed VCORE Voltage 3.3V Voltage 5V Voltage 12V Voltage SMART Q-Fan Function [36° C/96.5° F] [44° C/111 displays the CPU, chassis, and power fan speeds in rotations per minute (RPM). If any of the fans is not connected to the motherboard, the specific ASUS
  • Asus S-presso | Spresso User Manual - Page 83
    you to change the system boot options. Select an item then press to display the sub-menu. Boot Settings Boot Device Priority Removable Drives Boot Settings Configuration Security Specifies in the system. Configuration options: [xxxxx Drive] [Disabled] ASUS S-presso barebone system 4-29
  • Asus S-presso | Spresso User Manual - Page 84
    On ROM Display Mode Bootup Num-Lock PS/2 Mouse Support Typematic Rate Boot to OS/2 Wait for 'F1' If Error Hit 'DEL' Message Display Interrupt 19 display feature. Configuration options: [Disabled] [Enabled] Make sure that the Full Screen Logo item is set to [Enabled] if you want to use the ASUS
  • Asus S-presso | Spresso User Manual - Page 85
    system displays the message "Press DEL to run Setup" during POST. Configuration options: [Disabled] [Enabled] Interrupt 19 Capture [Disabled] When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled] ASUS S-presso barebone system
  • Asus S-presso | Spresso User Manual - Page 86
    Select an item then press to display the configuration options. Security Settings Supervisor Password User Password Change Supervisor Password Boot Sector Virus Protection (RTC) RAM. Refer to section "3.3 Jumper" for instructions on erasing the RTC RAM. 4-32 Chapter 4: BIOS information
  • Asus S-presso | Spresso User Manual - Page 87
    all the fields in the Setup utility. Change User Password Select this item to set or change the user password. The User Password item on top of the User Password item now shows I n s t a l l e d. To change the user password, follow the same steps as in setting a user password. ASUS S-presso barebone
  • Asus S-presso | Spresso User Manual - Page 88
    user password. Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user by an onboard backup battery and stays on even when the PC is turned off. When you select this option, a confirmation window appears.
  • Asus S-presso | Spresso User Manual - Page 89
    window appears. Select [Yes] to load default values. Select Exit Saving Changes or make other changes before saving the values to the non-volatile RAM. ASUS S-presso barebone system 4-35
  • Asus S-presso | Spresso User Manual - Page 90
    4-36 Chapter 4: BIOS information
  • Asus S-presso | Spresso User Manual - Page 91
    Starting up Chapter 5 This chapter helps you power up the system and install drivers and utilities from the support CD. ASUS S-presso barebone system
  • Asus S-presso | Spresso User Manual - Page 92
    For model S1-P111 with Instant On feature, make sure you have installed Instant On b e f o r e proceeding to this section. Refer to Chapter 1 of the S o f t wa r e I n f o r m a t i o n guide for instructions on installing Instant On. 5.1 Installing an operating system The S-presso system supports
  • Asus S-presso | Spresso User Manual - Page 93
    S-presso system contains useful software and several utility drivers that enhance the motherboard features. • Screen display and driver options may not be the same for other operating system versions. • The contents of the support CD are subject to change at any time without notice. Visit the ASUS
  • Asus S-presso | Spresso User Manual - Page 94
    item installs the Intel® Chipset INF Update Program. This driver enables Plug-n-Play INF support for the Intel® chipset components on the motherboard. When installed to the target system, this driver provides the method for configuring the chipset components. You can install this utility using three
  • Asus S-presso | Spresso User Manual - Page 95
    other software that the motherboard supports. ASUS PC Probe This utility continuously monitors vital system information such as fan rotations, CPU temperature, and system voltages, and alerts you on any detected problems. This utility helps you keep your computer in a healthy operating condition
  • Asus S-presso | Spresso User Manual - Page 96
    to display the ASUS contact information. 5.3.5 Other information The icons on the top right side of the screen give additional information on the motherboard and the contents of the support CD. Click an icon to display the specified information. Motherboard info Displays the general specifications
  • Asus S-presso | Spresso User Manual - Page 97
    the support CD contents in graphical format. Technical support form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support. Filelist Displays the contents of the support CD and a brief description of each in text format. ASUS S-presso barebone
  • Asus S-presso | Spresso User Manual - Page 98
    support CD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software for more information. 5.4.1 ASUS Update The ASUS Update is a utility that allows you to update the motherboard BIOS and drivers. This utility requires
  • Asus S-presso | Spresso User Manual - Page 99
    is displayed. Click Flash to update the BIOS. If you selected the option to update the BIOS from a file, a window pops up prompting you to locate the file. Select the file, click Save, then follow the screen instructions to complete the update process. ASUS S-presso barebone system 5-9
  • Asus S-presso | Spresso User Manual - Page 100
    , voltages, and temperatures. This utility also allows you to check other information about your computer, including hard disk space, memory usage, and CPU type, CPU speed, and internal/external frequencies through the DMI Explorer. Starting ASUS PC Probe When ASUS PC Probe starts, a splash screen
  • Asus S-presso | Spresso User Manual - Page 101
    Using ASUS PC Probe Monitoring tab Monitor Summary Shows a summary of the items being monitored. Temperature Monitor Shows the system temperature (for supported processors only). Temperature Warning the threshold level) Voltage Monitor Shows the system voltages. ASUS S-presso barebone system 5-11
  • Asus S-presso | Spresso User Manual - Page 102
    Settings Lets you set threshold levels and polling intervals or refresh times of the system temperature, fan rotation, and voltages. History Lets you record the monitoring activity of a certain component of the system for future reference. Information tab Hard Drive Shows the used and free space of
  • Asus S-presso | Spresso User Manual - Page 103
    the PC Probe icon brings up a menu to open or exit ASUS PC Probe and pause or resume all system monitoring. When the ASUS PC Probe senses a problem with your PC, portions of the ASUS PC Probe icon change to red, the PC speaker beeps, and the ASUS PC Probe monitor appears. ASUS S-presso barebone
  • Asus S-presso | Spresso User Manual - Page 104
    o n from the support CD that came with the motherboard package to activate the 6-channel audio feature. You must use 4-channel or 6-channel speakers for this setup. Setting to multi-channel audio After installing the audio driver, follow these instructions to adjust the audio settings and avail the
  • Asus S-presso | Spresso User Manual - Page 105
    e button. While testing, you will see a black circle moving on the screen indicating the audio path. The P l a y T e s t N o i s e button becomes display a list of options. Choose the desired setting. 12. Click A p p l y, then click O K when finished. 13. Reboot the computer. ASUS S-presso barebone
  • Asus S-presso | Spresso User Manual - Page 106
    Adjusting the microphone settings 1. Click on the Microphone A d v a n c e d button to display the A d v a n c e d Controls for Microphone window. 2. Check the box opposite M i c 2 S e l e c t to enable the front panel microphone. 3. Click C l o s e for the new settings to take effect. 5-16 The
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Multimedia System
fi
S-presso
User Guide
Hardware Information