Asus SABERTOOTH Z97 MARK 1 USB 3.1 User Guide - Page 49
Front panel audio connector 10-1 pin AAFP, Thermal Sensor connectors 2-pin T_SENSOR1; T_SENSOR2;
View all Asus SABERTOOTH Z97 MARK 1 USB 3.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
7. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • If you want to connect a high-definition or an AC'97 front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97]. 8. Thermal Sensor connectors (2-pin T_SENSOR1; T_SENSOR2;T_SENSOR3) These connectors are for the thermistor cables that monitor the temperature of the devices and the critical components inside the motherboard. Connect the thermistor cable and place the sensor on the device or the motherboard's component to detect its temperature. Chapter 1 ASUS SABERTOOTH Z97 MARK 1/USB 3.1 1-35