Asus SCSI 320-2 Global Array Manager Transition Tool - Page 30
Action
View all Asus SCSI 320-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Using Easy Configuration, Continued Step Action 7 When you have defined the current logical drive, choose Accept and press . The array selection screen appears if any unconfigured disk drives remain. 8 Repeat steps 3 through 7 to configure another array and logical drive. MegaRAID supports up to 40 logical drives per controller. If you are finished configuring logical drives, press to exit Easy Configuration. A list of the currently configured logical drives appears: After you respond to the Save prompt, the Configure menu appears. 9 Initialize the logical drives you have just configured. See Initializing Logical Drives on page 29. 22 MegaRAID Configuration Software Guide
MegaRAID Configuration Software Guide
22
Using Easy Configuration,
Continued
Step
Action
7
When you have defined the current logical drive, choose
Accept
and press <Enter>. The
array selection screen appears if any unconfigured disk drives remain.
8
Repeat steps 3 through 7 to configure another array and logical drive. MegaRAID supports
up to 40 logical drives per controller. If you are finished configuring logical drives, press
<Esc> to exit Easy Configuration. A list of the currently configured logical drives appears:
After you respond to the Save prompt, the Configure menu appears.
9
Initialize the logical drives you have just configured. See Initializing Logical Drives on
page 29.