Asus SL6300 SL6000/SL6300 user's manual - Page 20
Windows, NT 4.0 workstations
![]() |
View all Asus SL6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 3 3.2.6 Windows® NT 4.0 workstations: First, check for the IP protocol and, if necessary, install it: 1. In the Windows NT task bar, click the Start button, point to Settings, and then click Control Panel. 2. In the Control Panel window, double click the Network icon. 3. In the Network dialog box, click the Protocols tab. The Protocols tab displays a list of currently installed network protocols. If the list includes TCP/IP, then the protocol has already been enabled. Skip to step 9. 4. If TCP/IP does not display as an installed component, click [Add]. 5. In the Select Network Protocol dialog box, select TCP/IP, and then click [OK]. You may be prompted to install files from your Windows NT installation CD or other media. Follow the instructions to install the files. After all files are installed, a window displays to inform you that a TCP/IP service called DHCP can be set up to dynamically assign IP information. 6. Click [Yes] to continue, and then click [OK] if prompted to restart your computer. Next, configure the PCs to accept IP information assigned by the SL6000 / SL6300: 7. Open the Control Panel window, and then double-click the Network icon. 8. In the Network dialog box, click the Protocols tab. 9. In the Protocols tab, select TCP/IP, and then click [Properties]. 10. In the Microsoft TCP/IP Properties dialog box, click the radio button labeled Obtain an IP address from a DHCP server. 11. Click [OK] twice to confirm and save your changes, and then close the Control Panel. Chapter 3 ASUS VPN ADSL Router 19
![](/manual_guide/products/asus-sl6300-sl6000sl6300-users-manual-2d967a6/20.png)