Asus STRIKER II EXTREME User Manual - Page 60
USB connectors 10-1 pin USB 78; USB 910, Floppy disk drive connector 34-1 pin FLOPPY
UPC - 610839160181
View all Asus STRIKER II EXTREME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
3. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5. FLOPPY STRIKER II EXTREME PIN1 NOTE:Orient the red markings on the floppy ribbon cable to PIN 1. STRIKER II EXTREME/ STRIKER II NSE Floppy disk drive connector 4. USB connectors (10-1 pin USB 78; USB 910) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. USB+5V USB_P10USB_P10+ GND NC USB+5V USB_P8USB_P8+ GND NC STRIKER II EXTREME USB78 PIN 1 USB910 PIN 1 USB+5V USB_P9USB_P9+ GND USB+5V USB_P7USB_P7+ GND STRIKER II EXTREME/ STRIKER II NSE USB2.0 connectors Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard. 2-34 Chapter 2: Hardware information