Asus SV555 SV Series User Guide - Page 21

SV425 / SV465 / SV555 / SV427 / SV467 / SV557 GAMMA SELECTION Gamma is what controls the overall brightness of an image. Images which are not corrected properly can appear too white or too dark, so controlling the gamma properly can have a huge influence on the overall picture quality of your display. The options are: {NATIVE} / {2.2} / {2.4} / {S GAMMA}. NOISE REDUCTION Adjust to remove the noise in the image. You can select a suitable noise reduction level. The options are: {OFF} / {LOW} / {MIDDLE} / {HIGH}. NOTE: This item is functional for HDMI(Video mode), S-Video, Video, and YPbPr inputs only. FILM MODE Choose to turn on or off the film mode frame conversion function. • {AUTO} - Enable the film mode frame conversion function for movies and motion pictures. The display converts a 24 frames-per-second (24 fps) input signal format to DVD video signal format. Once this function is enabled, it is recommended that you set the {SCAN CONVERSION} function to {PROGRESSIVE}. • {OFF} - Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and VCR signals. PICTURE RESET Reset all settings in the Picture menu to factory preset values. 4.2.2. SCREEN menu PIP 1 2 3 AUTO SETUP AUTO ADJUST H POSITION V POSITION CLOCK CLOCK PHASE ZOOM MODE CUSTOM ZOOM H RESOLUTION V RESOLUTION INPUT RESOLUTION SCREEN RESET SCREEN OFF FULL 50 50 2200 66 1920 1080 V POSITION Press the [ ] button to move the image up, or [ ] to move the image down. CLOCK Adjust the width of the image. NOTE: This item is functional for VGA input only. CLOCK PHASE Adjust to improve the focus, clarity and stability of the image. NOTE: This item is functional for VGA input only. ZOOM MODE The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). The 16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). This function allows you to optimize the picture display on screen. The following zoom modes are available for: • PC mode: {FULL} / {NORMAL} / {CUSTOM} / {REAL}. • Video mode: {FULL} / {NORMAL} / {DYNAMIC} / {CUSTOM} / {REAL}. FULL This mode restores the correct proportions of pictures transmitted in 16:9 using the full screen display. NORMAL The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. DYNAMIC Fill the entire screen by stretching 4:3 pictures non-proportionally. CUSTOM Choose to apply the custom zoom settings in the Custom Zoom submenu. REAL This mode displays the image pixelby-pixel on screen without scaling the original image size. :SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU AUTO SETUP Use this function to let the display automatically optimize the display of VGA input image. NOTE: This item is functional for VGA input only. AUTO ADJUST Choose to let the display detect and display available signal sources automatically. • {ON} - Set the display to display the image automatically once a signal is connected. • {OFF} - Once a signal is connected, it can only be selected manually. H POSITION Press the [ ] button to move the image to the right, or [ ] to move the image to the left. CUSTOM ZOOM You can use this function to further customize the zoom settings to suit the image you want to display. NOTE: This item is functional only when the {ZOOM MODE} setting is set to {CUSTOM}. ZOOM Expands the horizontal and vertical sizes of the image simultaneously. H ZOOM Expands the horizontal size of the image only. 14