Asus T3-P5G965 User Guide - Page 24
Installing a DIMM
UPC - 610839584161
View all Asus T3-P5G965 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2.6 Installing a DIMM The system motherboard comes with two Double Data Rate 2 (DDR2) Dual Inline Memory Module (DIMM) sockets. The following figure illustrates the location of the sockets: DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 128 Pins 112 Pins R 240-pin DDR2 DIMM Sockets 2.6.1 Memory configurations You may install up to 4 GB system memory using 256 MB, 512 MB, and 1 GB DDR2 DIMMs. • Installing DDR2 DIMMS other than the recommended configurations may cause memory sizing error or system boot failure. Use any of the recommended configurations in the table on the next page. • Install only identical (the same type and size) DDR2 DIMMs in DIMM_A1 and DIMM_B1. • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. • Due to chipset resource allocation, the system may detect less than 2 GB system memory when you installed two 1 GB DDR2 memory. • If installing only one DDRII DIMM, pease install it in DIMM_A1 or A2 first. • This motherboard does not support memory modules made up of 128 Mb chips or double-sided x16 memory modules. 2- Chapter 2: Basic installation