Asus TS100-E6 PI4 User Manual - Page 44
LAN controller setting 3-pin LAN_SW1, LAN_SW2, Intel, SATA port S/W RAID setting 3-pin RAID_SEL1
View all Asus TS100-E6 PI4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
4. LAN controller setting (3-pin LAN_SW1, LAN_SW2) These jumpers allow you to enable or disable the onboard Marvell® 88E8056 Gigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature. 5. Intel® 3420 SATA port S/W RAID setting (3-pin RAID_SEL1) This jumper allows you to select the Serial ATA RAID configuration utility to use when you create disk arrays. Place the jumper caps on pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup Utility (default); otherwise, place the jumper caps on pins 2-3 to use the Intel® Matrix Storage Manager (IMSM). 3-6 Chapter 3: Motherboard information
Chapter 3: Motherboard information
3-6
4.
LAN controller setting (3-pin LAN_SW1, LAN_SW2)
These jumpers allow you to enable or disable the onboard Marvell
®
88E8056
Gigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature.
5.
Intel
®
3420 SATA port S/W RAID setting (3-pin RAID_SEL1)
This jumper allows you to select the Serial ATA RAID configuration utility to
use when you create disk arrays. Place the jumper caps on pins 1–
2 if you
want to use the LSI Logic Embedded SATA RAID Setup Utility (default);
otherwise, place the jumper caps on pins 2
–3 to use the Intel
®
Matrix Storage
Manager (IMSM).