Asus TS500-E4 TS500-E4 - Page 82
DSBV-D Keyboard power setting
UPC - 610839641390
View all Asus TS500-E4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
4. Keyboard power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. DSBV-D KBPWR1 12 23 +5V (Default) +5VSB DSBV-D Keyboard power setting 5. VGA controller setting (3-pin VGA_EN1) These jumpers allow you to enable or disable the onboard VGA controller. Set to pins 1-2 to activate the VGA feature. DSBV-D DSBV-D VGA setting VGA_EN1 12 23 Enable (Default) Disable 4- Chapter 4: Motherboard information
4-6
Chapter 4: Motherboard information
4. Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
5. VGA controller setting (3-pin VGA_EN1)
These jumpers allow you to enable or disable the onboard VGA
controller. Set to pins 1-2 to activate the VGA feature.
DSBV-D
DSBV-D Keyboard power setting
KBPWR1
(Default)
+5V
+5VSB
3
2
2
1
DSBV-D
DSBV-D VGA setting
VGA_EN1
12
23
Enable
(Default)
Disable