Asus TUF GAMING B760M-BTF WIFI D4 Users Manual English - Page 14

SATA 6Gb/s ports, USB 3.2 Gen 2 Type-C, Front Panel connector, USB 3.2 Gen 1 header, USB 2.0 headers

Get Asus TUF GAMING B760M-BTF WIFI D4 PDF manuals and user guides View all Asus TUF GAMING B760M-BTF WIFI D4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

• Intel® 13th & 12th Gen Processors M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode) • Intel® B760 Chipset M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode) M.2_3 slot (Key M), type 2280 only (supports PCIe 4.0 x4 mode) The M.2_3 slot shares bandwidth with the PCIEX16(G4) slot. When you install a device into the M.2_3 slot, the PCIEX16(G4) slot will be disabled. The M.2 SSD module is purchased separately. 7. SATA 6Gb/s ports The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and hard disk drives via SATA cables. 8. USB 3.2 Gen 2 Type-C® Front Panel connector The USB 3.2 Gen 2 Type-C® connector allows you to connect a USB 3.2 Gen 2 Type-C® module for an additional USB 3.2 Gen 2 Type-C® CC2 D+ VBUS TX1+ port on the front panel. The USB 3.2 Gen 2 Type-C® connector provides DGND TX1GND data transfer speeds of up to 10 Gb/s. RX2RX2+ RX1+ RX1- GND VBUS TX2- CC1 The USB 3.2 Gen 2 Type-C® module is purchased separately. TX2+ VBUS NC NC 9. USB 3.2 Gen 1 header The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1 header provides data transfer speeds of up to 5 Gb/s. The USB 3.2 Gen 1 module is purchased separately. GND IntA_P1_D+ IntA_P1_D- GND IntA_P1_SSTX+ IntA_P1_SSTX- GND IntA_P1_SSRX+ IntA_P1_SSRX- USB3+5V PIN 1 IntA_P2_D+ IntA_P2_DGND IntA_P2_SSTX+ IntA_P2_SSTXGND IntA_P2_SSRX+ IntA_P2_SSRXUSB3+5V 10. USB 2.0 headers The USB 2.0 headers allow you to connect USB modules for additional USB 2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480 Mb/s. DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! USB_78 PIN 1 USB+5V USB_P8USB_P8+ GND USB+5V USB_P7USB_P7+ GND NC USB_56 PIN 1 USB+5V USB_P6USB_P6+ GND The USB 2.0 module is purchased separately. USB+5V USB_P5USB_P5+ GND NC 11. Addressable Gen 2 headers ADD_GEN 2 +5V Data Ground The Addressable Gen 2 headers allow you to connect individually addressable PIN 1 RGB WS2812B LED strips or WS2812B based LED strips. The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/Data/ Ground), with a maximum power rating of 3A (5V), and the addressable headers on this board can handle a combined maximum of 500 LEDs. 1-4 Chapter 1: Product Introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
1-4
•
Intel
®
13
th
& 12
th
Gen Processors
M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
•
Intel
®
B760 Chipset
M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
M.2_3 slot (Key M), type 2280 only (supports PCIe 4.0 x4 mode)
The M.2_3 slot shares bandwidth with the PCIEX16(G4) slot. When you install a
device into the M.2_3 slot, the PCIEX16(G4) slot will be disabled.
The M.2 SSD module is purchased separately.
7. SATA 6Gb/s ports
The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and
hard disk drives via SATA cables.
8.
USB 3.2 Gen 2 Type-C
®
Front Panel connector
The USB 3.2 Gen 2 Type-C
®
connector allows you to connect a USB
3.2 Gen 2 Type-C
®
module for an additional USB 3.2 Gen 2 Type-C
®
port on the front panel. The USB 3.2 Gen 2 Type-C
®
connector provides
data transfer speeds of up to 10 Gb/s.
The USB 3.2 Gen 2 Type-C
®
module is purchased separately.
9.
USB 3.2 Gen 1 header
The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1
module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1
header provides data transfer speeds of up to 5 Gb/s.
The USB 3.2 Gen 1 module is purchased separately.
10. USB 2.0 headers
The USB 2.0 headers allow you to connect USB modules for
additional USB 2.0 ports. The USB 2.0 headers provide data
transfer speeds of up to 480 Mb/s.
DO NOT connect a 1394 cable to the USB connectors. Doing
so will damage the motherboard!
The USB 2.0 module is purchased separately.
11. Addressable Gen 2 headers
The Addressable Gen 2 headers allow you to connect individually addressable
RGB WS2812B LED strips or WS2812B based LED strips.
The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/Data/
Ground), with a maximum power rating of 3A (5V), and the addressable headers on this
board can handle a combined maximum of 500 LEDs.
VBUS
TX1+
TX1-
GND
RX1+
RX1-
VBUS
CC1
NC
NC
CC2
D+
D-
GND
RX2-
RX2+
GND
TX2-
TX2+
VBUS
GND
IntA_P1_D+
IntA_P1_D-
GND
IntA_P1_SSTX+
IntA_P1_SSTX-
GND
IntA_P1_SSRX+
IntA_P1_SSRX-
USB3+5V
PIN 1
IntA_P2_D+
IntA_P2_D-
GND
IntA_P2_SSTX+
IntA_P2_SSTX-
GND
IntA_P2_SSRX+
IntA_P2_SSRX-
USB3+5V
ADD_GEN 2
+5V
Data
Ground
PIN 1
USB+5V
USB_P7-
USB_P7+
GND
NC
USB+5V
USB_P8-
USB_P8+
GND
PIN 1
USB_78
USB+5V
USB_P5-
USB_P5+
GND
NC
USB+5V
USB_P6-
USB_P6+
GND
PIN 1
USB_56
Chapter 1: Product Introduction