Asus TUF GAMING B760M-E D4 Users Manual English - Page 13

4. Fan headers The Fan headers allow you to connect fans to cool the system. Header CPU_FAN CPU_OPT CHA_FAN1 CHA_FAN2 Max. Current 1A 1A 1A 1A Max. Power 12W 12W 12W 12W Default Speed Q-Fan Controlled Q-Fan Controlled Q-Fan Controlled Q-Fan Controlled Shared Control A A - FAN PWM FAN IN FAN PWR GND GND FAN PWR FAN IN FAN PWM FAN PWM FAN IN FAN PWR GND GND FAN PWR FAN IN FAN PWM 5. Power connectors These Power connectors allow you to connect your motherboard to a power supply. The power supply plugs are designed to fit in only one orientation. Find the proper orientation and push down firmly until the power supply plugs are fully inserted. Ensure to connect the 8-pin power plug or connect both the 8-pin and 4-pin power plugs. • We recommend that you use a PSU with a higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • If you want to use two high-end PCI Express x16 cards, use a PSU with 1000W power or above to ensure the system stability. 6. M.2 slots (Key M) The M.2 slots allow you to install M.2 devices such as M.2 SSD modules. • Intel® 13th & 12th Gen Processors M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode) • Intel® B760 Chipset M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode) The M.2 SSD module is purchased separately. 7. SATA 6Gb/s ports The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and hard disk drives via SATA cables. 8. USB 3.2 Gen 2 Type-C® Front Panel connector The USB 3.2 Gen 2 Type-C® connector allows you to connect a USB 3.2 Gen 2 Type-C® module for an additional USB 3.2 Gen 2 Type-C® port on the front panel. The USB 3.2 Gen 2 Type-C® connector provides data transfer speeds of up to 10 Gb/s. U32G2_C3 NC NC CC1 VBUS RX1RX1+ GND TX1TX1+ VBUS VBUS TX2+ TX2GND RX2+ RX2GND DD+ CC2 The USB 3.2 Gen 2 Type-C® module is purchased separately. TUF GAMING B760M-E D4 1-3