Asus TUF GAMING B760M-PLUS D4 Users Manual English - Page 16
Chassis intrusion header CHASSIS, Thunderbolt™ USB4, header, Q-LEDs, Product Introduction
View all Asus TUF GAMING B760M-PLUS D4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
I2C_SCL I2C_SDA I2C_IRQ# RTD3_POWER_EN NC PERST_N WAKE# • Chassis intrusion header (CHASSIS) The 2-pin header allows you to connect the chassis-mounted intrusion detection sensor or switch. The chassis intrusion sensor or switch sends a high-level signal to the header when a chassis component is removed or replaced, the signal is then generated as a chassis intrusion event. 16. Thunderbolt™ (USB4®) header The Thunderbolt™ (USB4®) header allows you to connect an add-on card that supports Intel®'s Thunderbolt™ Technology or USB4® function. • The add-on card is purchased separately. • Please visit the official website of your purchased add-on card for more details on compatibility. TB_HEADER PIN 1 The add-on card can only be used when installed to the PCIEX16(G4) slot. Ensure to install your add-on card to the PCIEX16(G4) slot. 17. Q-LEDs The Q-LEDs check key components (CPU, DRAM, VGA, and booting devices) during the motherboard booting process. If an error is found, the critical component's LED stays lit up until the problem is solved. The Q-LEDs provide the most probable cause of an error code as a starting point for troubleshooting. The actual cause may vary from case to case. FORCE_PWR CIO_PLUG_EVENT SLP_S3# SLP_S5# GND RTD3_SW 1-6 Chapter 1: Product Introduction