Asus TUF GAMING H570-PRO WIFI Users Manual English - Page 13

6. M.2 slots (Key M) The M.2 slots allow you to install M.2 devices such as M.2 SSD modules. • M.2_1 slot (Key M), type 2242/2260/2280 (Only Intel® 11th Gen processors support PCIe 4.0 x4 mode, this slot will be disabled for other CPUs) • M.2_2 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 3.0 x4 & SATA modes) • M.2_3 slot (Key M), type 2242/2260/2280 (supports PCIe 3.0 x4 mode) • Raid function for PCIe mode SSD in Intel® Rapid Storage Technology is available with either 1. Intel® SSDs installed in both CPU-attached and PCH-attached slots, or 2. any other 3rd party SSDs installed in PCH-attached slots. • To enable Intel® Optane™ Memory (Hybrid Storage device), it must be installed in PCH-attached slots with Intel® Rapid Storage Technology. • M.2_2 shares bandwidth with SATA6G_2. When M.2_2 runs SATA mode, SATA6G_2 will be disabled. 7. SATA 6Gb/s ports The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and hard disk drives via SATA cables. 8. USB 3.2 Gen 1 header (USB Type-C®) SBU2 The USB 3.2 Gen 1 header (USB Type-C®) allows you to connect a SBU1 CC1 USB 3.2 Gen 1 module for an additional USB 3.2 Gen 1 Type-C® port. VBUS RX1RX1+ The header provides a data transfer speed of up to 5 Gb/s. GND TX1- TX1+ VBUS 9. USB 3.2 Gen 1 header The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1 header provides data transfer speeds of up to 5 Gb/s. The USB 3.2 Gen 1 module is purchased separately. USB3+5V IntA_P2_SSRXIntA_P2_SSRX+ GND IntA_P2_SSTXIntA_P2_SSTX+ GND IntA_P2_DIntA_P2_D+ VBUS TX2+ TX2GND RX2+ RX2GND DD+ CC2 PIN 1 USB3+5V IntA_P1_SSRXIntA_P1_SSRX+ GND IntA_P1_SSTXIntA_P1_SSTX+ GND IntA_P1_DIntA_P1_D+ GND 10. USB 2.0 headers The USB 2.0 headers allow you to connect a USB module for additional USB 2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480 Mb/s. DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! PIN 1 The USB 2.0 module is purchased separately. USB+5V USB_P10USB_P10+ GND USB+5V USB_P9USB_P9+ GND NC 11. AURA Addressable Gen 2 headers ADD_GEN 2 +5V Data Ground The Addressable Gen 2 headers allow you to connect individually addressable PIN 1 RGB WS2812B LED strips or WS2812B based LED strips. The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/Data/ Ground), with a maximum power rating of 3A (5V), and the addressable headers on this board can handle a combined maximum of 500 LEDs. ASUS TUF GAMING H570-PRO WIFI 1-3