Asus TUSL2 TUSL2 User Manual - Page 85

Installing the Hard Disks, Enter FastTrak100 BIOS and FastBuild Utility

Get Asus TUSL2 PDF manuals and user guides View all Asus TUSL2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

5. SOFTWARE SETUP 5.4.1 Installing the Hard Disks The RAID 0 setting allows users to reformat two hard disks with the same new OS simultaneously. RAID 1 arrays can use a pre-existing hard disk along with a blank hard disk, or two new hard disks. 1. Install the first and second hard disk into the hard disk bays of your system. Connect each hard disk drive with a separate UltraDMA/100 cable, one to the Primary ATA IDE1 connector, and the other to the Secondary ATA IDE2 connector onboard the TUSL2. 2. Connect the power cables to the hard disks. 3. Ensure that the ATA/100 / RAID 0/1 jumper 3 is reset from the default to [1-2]. (See: Section 3.4.2, Hardware Setup: Motherboard Settings) 4. Boot-up the PC. 5.4.2 Enter FastTrak100 BIOS and FastBuild Utility 1. If this is the first time you have booted with two hard disks correctly installed, then FastTrak100™ "Lite" BIOS scans the IDE drives and displays this screen: 5. S/W SETUP RAID 2. Press keys to display the FastBuild™ Utility Main Menu: FastBuild (tm) Utility 1.31 (c) 1996-2000 Promise Technology, Inc. [ Main Menu ] Auto Setup 11 ]] View Drive Assignments . . . . [[ 22 ]] View Array 33 ]] Delete Array 44 ]] Rebuild Array 55 ]] Controller Configuration . . . [[ 66 ]] [ Keys Available ] Press 1..6 to select Option [ESC] Exit ASUS TUSL2 User's Manual 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
85
5.
SOFTWARE SETUP
ASUS TUSL2 User’s Manual
5.
S/W SETUP
5.4.1
Installing the Hard Disks
The RAID 0 setting allows users to reformat two hard disks with the same new OS
simultaneously.
RAID 1 arrays can use a pre-existing hard disk along with a blank
hard disk, or two new hard disks.
1.
Install the first and second hard disk into the hard disk bays of your system.
Connect each hard disk drive with a separate
UltraDMA/100
cable, one to the
Primary ATA IDE1 connector, and the other to the Secondary ATA IDE2 connector
onboard the TUSL2.
2.
Connect the power cables to the hard disks.
3.
Ensure that the ATA/100 / RAID 0/1 jumper 3 is reset from the default to [1-2].
(See:
Section 3.4.2, Hardware Setup: Motherboard Settings
)
4.
Boot-up the PC.
RAID
FastBuild (tm) Utility 1.31 (c) 1996-2000 Promise Technology, Inc.
Auto Setup . . . . . . . . . .
[ 1 ]
[ 1 ]
View Drive Assignments . . . . [ 2 ]
[ 2 ]
View Array . . . . . . . . . . [ 3 ]
[ 3 ]
Delete Array . . . . . . . . . [ 4 ]
[ 4 ]
Rebuild Array. . . . . . . . . [ 5 ]
[ 5 ]
Controller Configuration . . . [ 6 ]
[ 6 ]
Press 1..6 to select Option
[ESC] Exit
[ Main Menu ]
[ Keys Available ]
2
.
Press
<Ctrl-F>
keys to display the
FastBuild
™ Utility
Main Menu
:
5.4.2
Enter FastTrak100 BIOS and FastBuild Utility
1.
If this is the first time you have booted with two hard disks correctly installed,
then
FastTrak100
™ “Lite” BIOS scans the IDE drives and displays this
screen: