Asus TW510-E2 Service Guide - Page 130

6.1.3 NVIDIA® RAID configurations The motherboard includes a high performance SATA RAID controller integrated in the NVIDIA® CK-04 chip. The RAID controller supports RAID 0, RAID 1, RAID 1+0, and JBOD using four independent Serial ATA channels. Setting the BIOS RAID items After installing the hard disk drives, make sure to set the necessary RAID items in the BIOS before setting your RAID configuration. To set the BIOS RAID items: 1. Enter the BIOS Setup during POST. 2. Go to the A d v a n c e d menu, select O n b o a r d D e v i c e, then press . 3. Select the N V R A I D C o n f i g u r a t i o n option, then press . 4. Select the R A I D E n a b l e d item, then press to display the configuration options. 5. Select [ E n a b l e d ] from the options, then press . 6. Save your changes, then exit the BIOS Setup. • For detailed information on the NVIDIA® RAID configuration, refer to the "NVIDIA® RAID User's Manual" in the system or motherboard support CD. • The RAID BIOS setup screens shown in this section are for reference only, and may not exactly match the items on your screen. Entering the NVIDIA® RAID Utility To enter the NVIDIA® RAID Utility: 1. Restart the computer. 2. During POST, press to display the utility main menu. NVIDIA RAID Utility Oct 5 2004 - Define a New Array - RAID Mode: Striping Striping Block: Optimal Free Disks Loc Disk Model Name Array Disks Loc Disk Model Name 1.0.M 1.1.M 2.0.M 2.1.M XXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXX [→] Add [←] Del 6-4 [F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup Chapter 6: Driver installation