Asus V2-AE1 User Guide - Page 23
bracket lock to the retention module base until it clicks in place.
View all Asus V2-AE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
To install the CPU fan and heatsink assembly: 1. Place the heatsink on top of the installed CPU. Make sure that the fan and heatsink assembly perfectly fits the retention mechanism module base; otherwise you can not lock the retention bracket. 2. Attach one end of the retention bracket to the retention module base. 3. Attach the other end of the retention bracket (near the retention bracket lock) to the retention module base until it clicks in place. 4. Push down the retention bracket lock on the retention mechanism to secure the fan and heatsink to the module retention module base. 1 2 5 4 3 5. Connect the CPU fan cable to the connector labeled CPU_FAN on the motherboard. Do not forget to connect the CPU fan connector! Hardware monitoring error can occur if you fail to plug this connector. CPU_FAN GND +12V Rotation ® CPU fan connector ASUS Vintage2-AE1 2-7