Asus V2-M2V890 V2-M2V890 English Edition User's Manual - Page 61
ASUS EZ Flash utility
View all Asus V2-M2V890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
2. Copy the original or the latest motherboard BIOS file to the bootable floppy disk. 5.1.2 ASUS EZ Flash utility The ASUS EZ Flash feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS‑based utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing + during the Power-On Self-Test (POST). To update the BIOS using EZ Flash: 1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for your motherboard and rename the downloaded file as M2VTVM. ROM. Save the BIOS file to a floppy disk. 2. Reboot the system. 3. To launch EZ Flash, press during POST to display the following. User recovery requested. Starting BIOS recovery... Checking for floppy... • If there is no floppy disk in the drive, the error message "Floppy not found!" appears. • If the correct BIOS file is not in the floppy disk, the error message "Floppy not found!" is displayed. Make sure to rename the downloaded BIOS file as "M2VTVM.ROM". 4. Insert the floppy disk that contains the BIOS file. If all the necessary files are found in the floppy disk, EZ Flash performs the BIOS update process and automatically reboots the system when done. DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure! User recovery requested. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file "M2VTVM.ROM". Completed. Start flashing... Flashed successfully. Rebooting. ASUS V-Series M2V890 5-