Asus Vintage-PE2 Vintage-PE2 User''s Manual for English Edition - Page 35
Expansion card installation, Configuring an expansion card - driver
View all Asus Vintage-PE2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2.6.2 Expansion card installation To install an expansion card: 1. Lay the chassis on a stable surface. 2. Remove the metal cover opposite the slot that you wish to use. 3. Align the card golden fingers to the slot and its metal bracket to the slot opening on the chassis. 4. Press the card firmly until it is properly seated on the slot. 5. Secure the card to the chassis with a bracket screw. Metal cover PCI Express x16 slot PCI slots AGP slot 2.6.3 Configuring an expansion card After installing the expansion card, configure it by adjusting the software settings. 1. Turn on the system and change the necessary BIOS settings, if any. See Chapter 5 for information on BIOS setup. 2. Assign an IRQ to the card. Refer to the tables below. 3. Install the software drivers for the expansion card. ASUS Vintage-PE2 2-19