Asus Vintage-PH2 User Guide - Page 63
Chassis Intrusion Connector, TV Out Connector
View all Asus Vintage-PH2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper cap only when you intend to use the chassis intrusion detection feature. CHASSIS +5VSB_MB Chassis Signal GND ® Chassis Intrusion Connector (Default) 11. TV-out connector (6-1 pin TV-C) This 6-1 pin connector is for the TV-out port module that allows you to connect a television to your system. Connect the TV-out module to this connector, then install the module to a slot opening at the back of the system chassis. S-video Y out S-video C out CVBS out TV-C ® 1 TV Out Connector The TV-out module is purchased separately. ASUS Vintage V2-PH2 GND GND 4-11