Asus VivoMini UN45 Series Users manual English - Page 20

Upgrading memory modules, IMPORTANT, WARNING

Page 20 highlights

Upgrading memory modules Your VivoMini comes with two SO-DIMM memory slots that allow you to install two 2 GB, 4 GB, or 8 GB unbuffered with non-ECC 1.35 V DDR3L 204-pin SO-DIMMs for a maximum of 8 GB memory. NOTE: The CPU model N3000 only has one DIMM memory slot. IMPORTANT! • It is recommended that you replace the memory modules under professional supervision. Visit an ASUS service center for further assistance. • Always install DIMMs with the same CAS latency. For optimal compatibility, we recommend that you install memory modules of the same version or date code (D/C) from the same vendor. Check with the retailer to get the correct memory modules. • Refer to http://www.asus.com for the list of compatible DIMMs. You can only install 1.35 V DDR3L SO-DIMM to the VivoMini's DIMM slots. WARNING! • Ensure that your hands are dry before proceeding with the rest of the installation process. • Before installing memory modules, use a grounded wrist strap or touch a safely grounded object or metal object to avoid damaging them due to static electricity. To install or upgrade the memory modules: 1. Turn off your VivoMini then disconnect all cables and peripherals. 2. Place the VivoMini on a flat stable surface, with its top side facing down. 20 VivoMini UN Series

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

20
VivoMini UN Series
Your VivoMini comes with two SO-DIMM memory slots that allow
you to install two 2 GB, 4 GB, or 8 GB unbuffered with non-ECC 1.35 V
DDR3L 204-pin SO-DIMMs for a maximum of 8 GB memory.
NOTE:
The CPU model N3000 only has one DIMM memory slot.
IMPORTANT!
It is recommended that you replace the memory modules
under professional supervision. Visit an ASUS service center for
further assistance.
Always install DIMMs with the same CAS latency. For optimal
compatibility, we recommend that you install memory
modules of the same version or date code (D/C) from the same
vendor. Check with the retailer to get the correct memory
modules.
Refer to
http://www.asus.com for the list of compatible DIMMs.
You can only install 1.35 V DDR3L SO-DIMM to the VivoMini’s
DIMM slots.
To install or upgrade the memory modules:
1.
Turn off your VivoMini then disconnect all cables and peripherals.
2.
Place the VivoMini on a flat stable surface, with its top side facing
down.
WARNING!
Ensure that your hands are dry before proceeding with the rest
of the installation process.
Before installing memory modules, use a grounded wrist strap
or touch a safely grounded object or metal object to avoid
damaging them due to static electricity.
Upgrading memory modules