Asus WL-330N Quick Start Guide - Page 11

English 3. Click Apply when done. Q2: Network name or security keys are forgotten. • Try setting up the wired connection and configure the the encryption settings again. • Press the Restore button for more than five seconds to reset or restore the system to its factory default settings. • Factory default settings: User name / Password: IP address: admin / admin 192.168.1.1 SSID: ASUS Q3: My wireless connection speed is only 75 Mbps. • Check if your network card or your computer's built-in wireless feature has a 150 Mbps connection capability. Set the TCP/IP settings to automatically obtain an IP address. • By default, Wi-Fi certified n products are configured to operate using 20 MHz channels. To change the channel bandwidth from 20 MHz to 20/40 MHz and maximize the wireless throughput, go to Advanced Setting > Wireless > General in your wireless router's web GUI. Q4: What should I do if the firmware upgrading process failed. 1. Unplug the WL-330N from the power source. 2. Hold the Restore button and simultaneously re-plug the WL-330N into the power source. Release the Restore button when the power LED flashes slowly, which indicates that the WL-330N is in rescue mode. 3. From your computer's desktop, click Start > All Programs > ASUS Utility > WL-330N > Firmware Restoration. SUPPORT HOTLINE Area Hotline Number Support Languages Availability USA/ 1-812-282-2787 Canada English Mon. to Fri. 8:30-12:00am EST (5:30am-9:00pm PST) Brazil 4003 0988 (Capital) 0800 880 0988 (demais localidades) Portuguese Sat. to Sun. 9:00am-6:00pm EST (6:00am-3:00pm PST) Mon. to Fri. 9:00am-18:00 11