Asus WS C422 PRO/SE WS C422 PROSE User Manual - Page 98

Intel® Virtual Raid on CPU in UEFI BIOS, IntelR Virtual Raid on CPU

Get Asus WS C422 PRO/SE PDF manuals and user guides View all Asus WS C422 PRO/SE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 98 highlights

4.1.4 Intel® Virtual Raid on CPU in UEFI BIOS This feature requires a KEY module to enable CPU RAID functions with Intel® CPU RSTe. • The KEY module is purchased separately. • The HYPER M.2 X16 Card is purchased separately. • Due to CPU behavior, CPU RAID functions with Intel® CPU RSTe only supports Intel® Skylake / Cascade Lake-W Series Processors. • Refer to section 1.1.9 Internal connectors for the location of the VROC_HW_KEY connector. If you plan on using the CPU RAID configuration spanned across different PCIE slots as OS drives, please install the Hyper M.2 X16 Cards to PCIEX16 slots. To enter the Intel® Virtual Raid on CPU in UEFI BIOS: 1. Enter the BIOS Setup during POST. 2. Go to the Boot menu > CSM (Compatibility Support Module) > Launch CSM, then set the item to [Disabled]. 3. Go to the Advanced menu > CPU Storage Configuration, then set the PCIE slot(s) that you have installed the Hyper M.2 X16 Card(s) or PCIE X4 SSD Card(s) to Hyper M.2 X16 or PCIE X4 SSD Card correspondingly. 4. Save your changes and exit the BIOS Setup, then enter the BIOS Setup again. 5. Go to the Advanced menu > Intel(R) Virtual Raid on CPU > All Intel VMD Controllers, then press to display the Intel® Virtual Raid on CPU menu. Refer to Chapter 3 for details on entering and navigating through the BIOS Setup. Chapter 4 4-6 Chapter 4: RAID Configurations

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
4-6
Chapter 4: RAID Configurations
Chapter 4
4.1.4
Intel
®
Virtual Raid on CPU in UEFI BIOS
This feature requires a KEY module to enable CPU RAID functions with Intel
®
CPU RSTe.
•
The KEY module is purchased separately.
•
The HYPER M.2 X16 Card is purchased separately.
•
Due to CPU behavior, CPU RAID functions with Intel
®
CPU RSTe only supports Intel
®
Skylake / Cascade Lake-W Series Processors.
•
Refer to section
1.1.9 Internal connectors
for the location of the VROC_HW_KEY
connector.
If you plan on using the CPU RAID configuration spanned across different PCIE slots as
OS drives, please install the Hyper M.2 X16 Cards to PCIEX16 slots.
To enter the Intel
®
Virtual Raid on CPU in UEFI BIOS:
1.
Enter the BIOS Setup during POST.
2.
Go to the
Boot
menu >
CSM (Compatibility Support Module)
>
Launch CSM
, then
set the item to
[Disabled]
.
3.
Go to the
Advanced
menu >
CPU Storage Configuration
, then set the PCIE slot(s)
that you have installed the Hyper M.2 X16 Card(s) or PCIE X4 SSD Card(s) to
Hyper
M.2 X16
or
PCIE X4 SSD Card
correspondingly.
4.
Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
5.
Go to the
Advanced
menu >
Intel(R) Virtual Raid on CPU
>
All Intel VMD
Controllers
, then press <Enter> to display the Intel
®
Virtual Raid on CPU menu.
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.