Asus X99-A/USB 3.1TRANSFER EXPRESS User Guide - Page 47
Internal connectors, Intel, X99 Serial ATA 6 Gb/s connectors 7-pin SATA6G_12, SATA6G_34
View all Asus X99-A/USB 3.1TRANSFER EXPRESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
1.2.9 Internal connectors 1. Intel® X99 Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA6G_34, SATA6G_5, SATA6G_6/SATAEXPRESS, SATA6G_78, SATA6G_910) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® X99 chipset. Chapter 1 • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.6.3 PCH Storage Configuration for details. • Before creating a RAID set, refer to the manual bundled in the motherboard support DVD. • The SATAEXPRESS_1 connector can support one SATA Express device or two SATA devices. • Due to chipset behavior, the SATA6G_78 and SATA6G_910 ports (black) do not support Intel® Rapid Storage Technology and RAID configuration. ASUS X99-A/USB 3.1 1-31