Asus X99-WS IPMI User Guide - Page 165
Installing three SLI-ready graphics cards, card. Ensure that the connector is firmly in place.
View all Asus X99-WS IPMI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
4. Align and firmly insert the SLI bridge connector to the goldfingers on each graphics card. Ensure that the connector is firmly in place. 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately. 6. Connect a VGA or a DVI cable to the graphics card. SLI bridge Goldfingers 6.2.3 Installing three SLI-ready graphics cards Refer to the documentation that came with your graphics card package to install the device drivers. To install three SLI-ready graphics cards: 1. Prepare three SLI-ready graphics cards. 2. Insert the three graphics cards into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 1 in this user manual for locations of the PCIEX16 slots recommended for multi-graphics card installation. 3. Ensure that the cards are properly seated on the slots. Chapter 6 X99-WS/IPMI 6-7