Asus Z10PE-D16 10G-2T User Guide

Asus Z10PE-D16 10G-2T Manual

Get Asus Z10PE-D16 10G-2T PDF manuals and user guides View all Asus Z10PE-D16 10G-2T manuals
Add to My Manuals
Save this manual to your list of manuals

Asus Z10PE-D16 10G-2T manual content summary:

  • Asus Z10PE-D16 10G-2T | User Guide - Page 1
    Z10PE-D16 Series
  • Asus Z10PE-D16 10G-2T | User Guide - Page 2
    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY
  • Asus Z10PE-D16 10G-2T | User Guide - Page 3
    guide is organized x Where to find more information x Z10PE-D16 Series specifications summary xii Chapter 1: Product Introduction 1.1 Welcome!...1-2 1.2 Package contents 1-2 1.3 Serial number label 1-3 1.4 Special features 1-3 1.4.1 Product highlights 1-3 1.4.2 Innovative ASUS
  • Asus Z10PE-D16 10G-2T | User Guide - Page 4
    dual function power switch 3-3 Chapter 4: BIOS setup 4.1 Managing and updating your BIOS 4-2 4.1.1 ASUS CrashFree BIOS 3 utility 4-2 4.1.2 ASUS 4-12 4.4.4 Onboard LAN I350 IO Configuration (Z10PE-D16/4L and Z10PE-D16 4-13 4.4.5 Onboard LAN X540 IO Configuration (Z10PE-D16/10G-2T only 4-14 iv
  • Asus Z10PE-D16 10G-2T | User Guide - Page 5
    4.5.6 IIO Configuration 4-32 4.5.7 PCH Configuration 4-33 4.5.8 Miscellaneous Configuration 4-35 4.5.9 Server ME Configuration 4-35 4.5.10 Runtime Error Logging Support 4-35 4.6 Server Mgmt menu 4-36 4.7 Event Logs menu 4-40 4.7.1 Change Smbios Event Log Settings 4-40 4.7.2 View Smbios Event
  • Asus Z10PE-D16 10G-2T | User Guide - Page 6
    Contents Chapter 5: RAID Configuration 5.1 Setting up RAID 5-2 5.1.1 RAID definitions 5-2 5.1.2 Installing hard disk drives 5-3 5.1.3 Setting the RAID item in BIOS 5-3 5.1.4 RAID configuration utilities 5-3 5.2 LSI Software RAID Configuration Utility 5-4 5.2.1 Creating a RAID set 5-5
  • Asus Z10PE-D16 10G-2T | User Guide - Page 7
    6.2 Management applications and utilities installation 6-13 6.3 Running the Support DVD 6-13 6.4 Intel® chipset device software installation 6-17 6.5 Reference Information A.1 Z10PE-D16 Series block diagram A-2 Z10PE-D16/10G-2T A-2 Z10PE-D16/4L A-3 Z10PE-D16 A-4 ASUS contact information 1
  • Asus Z10PE-D16 10G-2T | User Guide - Page 8
    frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no , we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. viii
  • Asus Z10PE-D16 10G-2T | User Guide - Page 9
    service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals stable surface. • If you encounter technical problems with the product, contact a qualified service technician or your retailer. DO NOT throw the
  • Asus Z10PE-D16 10G-2T | User Guide - Page 10
    Australian Consumer Law. For the latest product warranty details please visit http:// support.asus.com. Our goods come with guarantees that cannot be excluded under the failure. If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at http://support.asus.com x
  • Asus Z10PE-D16 10G-2T | User Guide - Page 11
    guide is organized This user guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technologies it supports Chapter 5: RAID configuration This chapter provides instructions for setting up, creating, and configuring
  • Asus Z10PE-D16 10G-2T | User Guide - Page 12
    of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task
  • Asus Z10PE-D16 10G-2T | User Guide - Page 13
    -D16/10G-2T Z10PE-D16/4L Z10PE-D16 Processor Support / System Bus 2 x Socket R3 2011 Intel® Xeon® processor E5-2600 V3 product family QPI 6.4 / 8.0 / 9.6 GTps Core Logic Intel® C612 PCH Form Factor SSI EEB, 12 in. x 13 in. Fan Speed Control ASUS Features Rack Ready (Rack and Pedestal dual
  • Asus Z10PE-D16 10G-2T | User Guide - Page 14
    Z10PE-D16/10G-2T Z10PE-D16/4L Intel® C612 Z10PE-D16 10 x SATA 6 Gbps ports or 9 x SATA 6 Gbps ports + 1 x discrete M.2 connector Intel® RSTe (supports software RAID 0, 1, 5, and 10, Windows only) LSI® MegaRAID (supports software RAID 0, 1, and 10, Linux and Windows) Optional kits**: ASUS
  • Asus Z10PE-D16 10G-2T | User Guide - Page 15
    Chapter 1: Product Introduction Product introduction This chapter describes the motherboard features and the new technologies it supports. 1
  • Asus Z10PE-D16 10G-2T | User Guide - Page 16
    ASUS® Z10PE-D16 Series motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS Pack Standard Bulk Pack I/O Shield 1 1 SATA 6G cable 10 - Support CD 1 1 piece per carton Application CD ASWM Enterprise SDVD 1
  • Asus Z10PE-D16 10G-2T | User Guide - Page 17
    shown in the figure below. With the correct serial number of the product, ASUS Technical Support team members can then offer a quicker and satisfying solution to your problems. Z10PE-D16 Series xxS2xxxxxxxx Made in China 合格 1.4 Special features 1.4.1 Product highlights Latest Processor Technology
  • Asus Z10PE-D16 10G-2T | User Guide - Page 18
    supports USB 3.0 and up to 10 SATA III ports thus bringing more features and benefits to the target users. Intel® X540BT2 10GbE LAN controller (Z10PE-D16/10G-2T only) The Intel® 10 Gigabit Ethernet controller X540 is a dual of service of up ASUS features ASUS Fan Speed control technology The ASUS
  • Asus Z10PE-D16 10G-2T | User Guide - Page 19
    Chapter 2: Hardware Information Hardware Information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. 2
  • Asus Z10PE-D16 10G-2T | User Guide - Page 20
    2.1 Before you proceed Take note of the following precautions before you install any motherboard component or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object,
  • Asus Z10PE-D16 10G-2T | User Guide - Page 21
    the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard. Place this side towards the rear of the chassis Z10PE-D16 Series 2-3
  • Asus Z10PE-D16 10G-2T | User Guide - Page 22
    2.2.3 Motherboard layout Z10PE-D16/10G-2T 2-4 Chapter 2: Hardware information
  • Asus Z10PE-D16 10G-2T | User Guide - Page 23
    Z10PE-D16/4L Z10PE-D16 Series 2-5
  • Asus Z10PE-D16 10G-2T | User Guide - Page 24
    Z10PE-D16 2-6 Chapter 2: Hardware information
  • Asus Z10PE-D16 10G-2T | User Guide - Page 25
    ) 6. DDR4 thermal event setting (3-pin DIMMTRIP1) 7. RAID configuration utility selection (3-pin RAID_SEL1) 8. BMC Setting (3-pin BMC_EN1) Page 2-26 2-27 2-27 2-28 2-28 2-29 2-29 2-30 Z10PE-D16 Series 2-7
  • Asus Z10PE-D16 10G-2T | User Guide - Page 26
    FRNT_FAN1, FRNT_FAN2, FRNT_FAN3, FRNT_FAN4, FRNT_FAN5, REAR_FAN1, REAR_FAN2) 6. Serial General Purpose Input/Output connector (6-1 pin SGPIO1/ SSGPIO1) 7. 10G LAN LED connector (5-1 pin LAN34_LED1) 8. Power Supply SMBus connector (5-pin PSUSMB1) 9. Serial port connector (10-1 pin COM1
  • Asus Z10PE-D16 10G-2T | User Guide - Page 27
    only if the damage is shipment/ transit-related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the the triangle mark is on the top-right position. Triangle mark Z10PE-D16 Series 2-9
  • Asus Z10PE-D16 10G-2T | User Guide - Page 28
    2. Press the left load lever down with your thumb (A), move it to the right until it is released from the retention tab (B) then gently lift the load lever (C). To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. Load lever 3. Press the right load lever
  • Asus Z10PE-D16 10G-2T | User Guide - Page 29
    to let it sit on top of the CPU. Do not force to close the load plate as it may damage the CPU. Triangle mark Z10PE-D16 Series 2-11
  • Asus Z10PE-D16 10G-2T | User Guide - Page 30
    tab (K). The PnP cap pops out of the load plate when the right load lever is inserted into the retention tab. Keep the PnP cap. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the PnP cap on the LGA 2011-3 socket. PnP cap 11. Push
  • Asus Z10PE-D16 10G-2T | User Guide - Page 31
    motherboard labeled CPU_FAN1 / CPU_FAN2. DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. Z10PE-D16 Series 2-13
  • Asus Z10PE-D16 10G-2T | User Guide - Page 32
    comes with sixteen (16) Double Data Rate 4 (DDR4) Dual Inline Memory Modules (DIMM) sockets. The figure illustrates the location into the DIMM sockets using the memory configurations in this section. • Refer to ASUS Server AVL for the updated list of compatible DIMMs. • When installing only one
  • Asus Z10PE-D16 10G-2T | User Guide - Page 33
    for a dual CPU configuration. Dual CPU configuration DIMM (CPU1) DIMM (CPU2) A2 A1 B2 B1 C2 C1 D2 D1 E2 E1 F2 F1 G2 G1 H2 H1 2 DIMMs P P 4 DIMMs P P P P 8 DIMMs P P P P P P P P 12 DIMMs P P P P P PPPPP P P 16 DIMMs P P P P P P P P P P P P P P P P Z10PE-D16 Series 2-15
  • Asus Z10PE-D16 10G-2T | User Guide - Page 34
    the motherboard package. • Refer to the user guide for qualified vendor lists of the memory modules. Removing a DIMM from a single clip DIMM socket 1. Press the retaining clip outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your fingers when pressing
  • Asus Z10PE-D16 10G-2T | User Guide - Page 35
    drivers for the expansion card. When using PCI cards on shared slots, ensure that the drivers support "Share IRQ" or that the cards do not need IRQ assignments. Otherwise, conflicts may arise between the two PCI groups, making the system unstable and the card inoperable. Z10PE-D16 Series 2-17
  • Asus Z10PE-D16 10G-2T | User Guide - Page 36
    link) The onboard PCIE2 and PCIE4 provide two x16 Gen3 link to CPU2; the onboard PCIE6 provide one x16 Gen3 link to CPU1. These slots support VGA cards and various server class high performance add-on cards. 2.5.5 PCI Express x8 slot (x8 link) The onboard PCIE3 provides one x8 Gen3 link
  • Asus Z10PE-D16 10G-2T | User Guide - Page 37
    PCI-E x8 (x4 Gen3 link) (MIO supported) 2 PCIE2 PCI-E x16 (x16 Gen3 link) 3 PCIE3 PCI-E x8 (x8 Gen3 link) 4 PCIE4 PCI-E x16 (x16 Gen3 link) 6 PCIE6 PCI-E x16 (x16 Gen3 link) The ASUS PIKE 3008, PIKE 3108, and PEM-FDR cards must be installed on PCIE slot 2/3/4/6. Z10PE-D16 Series 2-19
  • Asus Z10PE-D16 10G-2T | User Guide - Page 38
    (BMCLED1) The green heartbeat LED blinks per second to indicate that the ASMB8 is working normally. The heartbeat LED functions only when you enable the ASUS ASMB8. 2-20 Chapter 2: Hardware information
  • Asus Z10PE-D16 10G-2T | User Guide - Page 39
    3. CPU Warning LED (ERRCPU1, ERRCPU2) The CPU warning LEDs light up to indicate failure on either CPU1, CPU2, or both. 4. Power LED (P5VLED1) This LED lights up when you turn on the system using the Power-on button. Z10PE-D16 Series 2-21
  • Asus Z10PE-D16 10G-2T | User Guide - Page 40
    , MEMERRG2, MEMERRH1, MEMERRH2) The DIMM warning LEDs light up to indicate failure on the corresponding DIMMs. The warning LEDs only functions when you enable the ASUS ASMB8. 2-22 Chapter 2: Hardware information
  • Asus Z10PE-D16 10G-2T | User Guide - Page 41
    operate. 8. Q-Code LEDs (LED1) The Q-Code LED provides a 2-digit display that shows the status of your system. Refer to the Q-Code table of this user guide for more information about the 2-digit codes. Z10PE-D16 Series 2-23
  • Asus Z10PE-D16 10G-2T | User Guide - Page 42
    Q-Code table Action Normal boot PHASE Security Phase PEI(Pre-EFI initialization) phase POST CODE 01 02 03 06 04 10 15 19 78~00 A1 A3 A7 A8 A9 AA AB AC AD AE AF 2F B0 B1 AF B4 B2 B3 B5 B6 B7 B8 B9 BA BB BC BF 5A 31 32 34 36 4F TYPE Progress Progress Progress Progress Progress Progress Progress
  • Asus Z10PE-D16 10G-2T | User Guide - Page 43
    . BIOS Setup Utility password verify BIOS Setup Utility start BIOS Setup Utility input wait Ready to boot event Legacy boot event APIC mode PIC mode Z10PE-D16 Series 2-25
  • Asus Z10PE-D16 10G-2T | User Guide - Page 44
    2.7 Jumpers 1. Clear RTC RAM (3-pin CLRTC1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS which include
  • Asus Z10PE-D16 10G-2T | User Guide - Page 45
    to pins 1-2 to activate the Gigabit LAN feature. Refer to the table below for more information about the LAN controller settings: LAN_SW1, LAN_SW2 LAN_SW3, LAN_SW4 Z10PE-D16/10G-2T - for X540-BT2 Z10PE-D16/4L Z10PE-D16 for I350-AM2 for I350-BT2
  • Asus Z10PE-D16 10G-2T | User Guide - Page 46
    4. PMBus 1.2 PSU select jumper (3-pin SMART_PSU1) This jumper allows you to select PSU PMBus version. Set to pins 1-2 for PMBus, set to pins 2-3 for others. 5. ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to force Intel® Management Engine (ME) boot from recovery mode
  • Asus Z10PE-D16 10G-2T | User Guide - Page 47
    LSI MegaRAID software RAID Configuration Utility; otherwise, place the jumper caps to pins 2-3 to use the Intel® Rapid Storage Technology enterprise SATA Option ROM Utility. Z10PE-D16 Series 2-29
  • Asus Z10PE-D16 10G-2T | User Guide - Page 48
    8. BMC Setting (3-pin BMC_EN1) This jumper allows you to enable or disable the ASMB8. 2-30 Chapter 2: Hardware information
  • Asus Z10PE-D16 10G-2T | User Guide - Page 49
    VGA- compatible devices. 3. RJ-45 ports for 10G LAN of Z10PE-D16/10G-2T or GbE LAN for Z10PE-D16/4L. These ports allows 10 Gigabit or Gigabit connection error on a server rack. Refer to section Onboard LEDs of this user guide for more information. 8. Power LED. This LED lights up when the Power
  • Asus Z10PE-D16 10G-2T | User Guide - Page 50
    OFF 10 Mbps connection ORANGE 100 Mbps connection GREEN 1 Gbps connection ACT/LINK SPEED LED LED DM LAN port 10G LAN port LED indications (Z10PE-D16/10G-2T only) Activity/Link LED Status Description OFF No link GREEN Linked BLINKING Data activity Status OFF YELLOW GREEN Speed LED
  • Asus Z10PE-D16 10G-2T | User Guide - Page 51
    supported on this motherboard, refer to the RAID Configuration chapter of this user guide. • The actual data transfer rate depends on the speed of Serial ATA hard disks installed. • The SSATA4 [Light Gray] will be automatically turned off if the M.2 connector (NGFF) is occupied. Z10PE-D16
  • Asus Z10PE-D16 10G-2T | User Guide - Page 52
    2. M.2 (NGFF) connector (NGFF1) This connector allows you to install an M.2 device. This connector supports type 2242 devices on both PCI-E and SATA interface. The M.2 (NGFF) device is purchased separately 3. USB 2.0 connector (10-1 pin USB56) These connectors are for USB 2.0
  • Asus Z10PE-D16 10G-2T | User Guide - Page 53
    CPU_FAN2, FRNT_FAN1, FRNT_FAN2, FRNT_FAN3, FRNT_FAN4, FRNT_FAN5, REAR_FAN1, REAR_FAN2) The fan connectors support cooling fans. Connect the fan cables to the fan connectors on the motherboard, ensuring on the fan connectors! • All fans feature the ASUS Smart Fan technology. Z10PE-D16 Series 2-35
  • Asus Z10PE-D16 10G-2T | User Guide - Page 54
    the jumper for SSATA1~4. 7. 10G LAN LED connector (5-1 pin LAN34_LED1) These leads are for 10G LAN activity LEDs on the front panel. Connect the LAN LED cable to the backplane for LAN activity indication. The 10G LAN LED connector is only available on Z10PE-D16/10G-2T. 2-36 Chapter 2: Hardware
  • Asus Z10PE-D16 10G-2T | User Guide - Page 55
    Please contact ASUS if your need further support. 9. Serial port connector (10-1 pin COM1) This connector is for the serial COM port. Connect the serial port module cable to one of these connectors, then install the module to a slot opening at the back of the system chassis. Z10PE-D16 Series 2-37
  • Asus Z10PE-D16 10G-2T | User Guide - Page 56
    10. Trusted Platform Module connector (20-1 pin TPM1) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys integrity. 11. VGA connector (10-1 pin VGA_HDR1) This connector supports the VGA High Dynamic-Range interface. 2-38 Chapter 2: Hardware information
  • Asus Z10PE-D16 10G-2T | User Guide - Page 57
    system may become unstable or may not boot up if the power is inadequate. • This motherboard supports ATX2.0 PSU or later version. • The 4-pin EATX12V_NVDIMM1 is only required for NVDIMM. • Ensure that your PSU can provide at least the minimum power required by your system. Z10PE-D16 Series 2-39
  • Asus Z10PE-D16 10G-2T | User Guide - Page 58
    13. System panel connector (20-1 pin PANEL1) This connector supports several chassis-mounted functions. 1. System power LED (3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to
  • Asus Z10PE-D16 10G-2T | User Guide - Page 59
    . 4. Locator Button/Switch (2-pin LOCATORBTN#) These connectors are for the locator button on the front panel. This button queries the state of the system locator. Z10PE-D16 Series 2-41
  • Asus Z10PE-D16 10G-2T | User Guide - Page 60
    15. Hard disk activity LED connector (4-pin HDLED1) This LED connector is for the storage add-on card cable connected to the SATA or SAS add-on card. The read or write activities of any device connected to the SATA or SAS add-on card causes the front panel LED to light up. 16. Chassis Intrusion (2-
  • Asus Z10PE-D16 10G-2T | User Guide - Page 61
    Chapter 3: Powering Up Powering Up This chapter describes the power up sequence, and ways of shutting down the system. 3
  • Asus Z10PE-D16 10G-2T | User Guide - Page 62
    Detected. No VGA Detected. Chassis Intrusion. BIOS-image Crash Detected. 7. At power on, hold down the key to enter the BIOS Setup. Follow the instructions in Chapter 4. 3-2 Chapter 3: Powering up
  • Asus Z10PE-D16 10G-2T | User Guide - Page 63
    the option that best describes why you want to shut down the computer. 5. Click Continue. 3.2.2 Using the dual function power switch While the system is ON, press the power switch for less than four seconds to put system enter the soft-off mode regardless of the BIOS setting. Z10PE-D16 Series 3-3
  • Asus Z10PE-D16 10G-2T | User Guide - Page 64
  • Asus Z10PE-D16 10G-2T | User Guide - Page 65
    Chapter 4: BIOS setup BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. 4
  • Asus Z10PE-D16 10G-2T | User Guide - Page 66
    disk drive in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the BUPDATER utility. 4.1.1 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the
  • Asus Z10PE-D16 10G-2T | User Guide - Page 67
    2. Enter the BIOS setup program. Go to the Tool menu then select ASUS EZ Flash Utility. Press . ASUS Tek. EzFlash Utility Current Platform Platform : Z10PE-D16 Version : 0020 Build Date :04/25/2014 New Platform Platform : Z10PE-D16 Version : 0022 Build Date :05/05/2014 FS0 System Volume
  • Asus Z10PE-D16 10G-2T | User Guide - Page 68
    file for the motherboard. Save the BIOS file to a bootable USB flash disk drive. 2. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support website at support.asus.com to the bootable USB flash disk drive you created earlier. 3. Boot the system in DOS mode, then at the prompt, type: BUPDATER
  • Asus Z10PE-D16 10G-2T | User Guide - Page 69
    then starts updating the BIOS file. ASUS Tek. EzFlash Utility Current Platform Platform : Z10PE-D16 Version : 0020 Build Date :04/25/2014 New Platform Platform : Z10PE-D16 Version : 0022 Build Date :05/05/2014 FS0 System Volume Information Z10PE-D16 BIOS Windows [Up/Down
  • Asus Z10PE-D16 10G-2T | User Guide - Page 70
    4.2 BIOS setup program This motherboard supports a programmable firmware chip that you can update using the provided utility not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. 4-6 Chapter 4: BIOS setup
  • Asus Z10PE-D16 10G-2T | User Guide - Page 71
    options To select an item on the menu bar, press the right or left arrow key on the keyboard until the desired item is highlighted. Z10PE-D16 Series 4-7
  • Asus Z10PE-D16 10G-2T | User Guide - Page 72
    4.2.3 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Event Logs, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. 4.2.4 Submenu items A solid
  • Asus Z10PE-D16 10G-2T | User Guide - Page 73
    . 4.3.1 System Date [Day xx/xx/xxxx] Allows you to set the system date. 4.3.2 System Time [xx:xx:xx] Allows you to set the system time. Z10PE-D16 Series 4-9
  • Asus Z10PE-D16 10G-2T | User Guide - Page 74
    4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. 4-10 Chapter 4: BIOS setup
  • Asus Z10PE-D16 10G-2T | User Guide - Page 75
    with some OS. 4.4.2 Smart Settings SMART Self Test [Disabled] Allows you to run SMART Self Test on all HDDs during POST. Configuration options: [Disabled] [Enabled] Z10PE-D16 Series 4-11
  • Asus Z10PE-D16 10G-2T | User Guide - Page 76
    4.4.3 NCT6779D Super IO Configuration Serial Port 1 / Serial Port 2 Configuration Allows you to set the parameters of Serial Port 1/ Serial Port 2. Serial Port [Enabled] Allows you to enable or disable Serial Port. Configuration options: [Disabled] [Enabled] Change Settings [Auto] Allows you to
  • Asus Z10PE-D16 10G-2T | User Guide - Page 77
    I350 LAN1 / LAN2 Enable is set to [Enabled]. LAN1/ LAN2 Option ROM Support [Enabled] Allows you to load the Intel LAN ROM. Configuration options: [Disabled] [Enabled] Intel LAN I350 LAN3 / LAN4 Enable [Enabled] (Z10PE-D16/4L only) Allows you to enable or disable the Intel LAN. Configuration options
  • Asus Z10PE-D16 10G-2T | User Guide - Page 78
    4.4.5 Onboard LAN X540 IO Configuration (Z10PE-D16/10G2T only) This allows you to change the enable or disable the onboard LAN. Intel LAN Support [Enabled] Allows you to enable or disable the Intel LAN. Configuration options: [Disabled] [Enabled] Intel LAN ROM Type [PXE] Allows you to select the
  • Asus Z10PE-D16 10G-2T | User Guide - Page 79
    UTF8] Allows you to set the terminal type. [VT100] ASCII char set. [VT100+] Extends VT100 to support color, function keys, et. [VT-UTF8] Uses UTF8 encoding to map Unicode chars onto 1 or ] [19200] [38400] [57600] [115200] Data Bits [8] Configuration options: [7] [8] Z10PE-D16 Series 4-15
  • Asus Z10PE-D16 10G-2T | User Guide - Page 80
    Resolution [80x24] This allows you to set the number of rows and columns supported on the Legacy OS. Configuration options: [80x24] [80x25] Putty Keypad [VT100 Serial Port for Out-of-Band Management/ Windows Emergency Management Services (EMS) Console Redirection [Disabled] Allows you to enable
  • Asus Z10PE-D16 10G-2T | User Guide - Page 81
    . Configuration options: [9600] [19200] [57600] [115200] Flow Control [None] Microsoft Windows Emergency Management Services (EMS) allow for remote management of a Windows Server OS through a serial port. Configuration options: [None] [Hardware RTS/CTS] [Software Xon/Xoff] Z10PE-D16 Series 4-17
  • Asus Z10PE-D16 10G-2T | User Guide - Page 82
    4.4.7 APM Allows you to configure the Advance Power Management (APM) settings. Restore AC Power Loss [Last State] When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the
  • Asus Z10PE-D16 10G-2T | User Guide - Page 83
    if the system supports 64-bit PCI decoding. Configuration options: [Disabled] [Enabled] SR-IOV Support [Disabled] This option enables or disables SIngle Root IO Virtualization Support if the system has SRIOV capable PCIe devices. Configuration options: [Disabled] [Enabled] Z10PE-D16 Series 4-19
  • Asus Z10PE-D16 10G-2T | User Guide - Page 84
    . Configuration options: [Disable] [Enable] The following item appears only when Network stack is set to [Enabled]. Ipv4 PXE Support [Enabled] Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will not be created. Configuration options: [Disabled] [Enabled]. Ipv6 PXE
  • Asus Z10PE-D16 10G-2T | User Guide - Page 85
    [Enabled] This option allows you to enable or disable CSM Support. Configuration options: [Disabled] [Enabled] GateA20 Active [Upon Request] This allows you to set the execution policy for devices other than Network, Storage, or Video. Configuration options: [UEFI ] [Legacy] Z10PE-D16 Series 4-21
  • Asus Z10PE-D16 10G-2T | User Guide - Page 86
    4.4.11 Trusted Computing Configuration Security Device Support [Disabled] Allows you to enable or disable the BIOS support for security device. Configuration options: [Disabled] [Enabled] 4-22 Chapter 4: BIOS setup
  • Asus Z10PE-D16 10G-2T | User Guide - Page 87
    support. Configuration options: [Disabled] [Enabled] Port 60/64 Emulation [Enabled] This allows you to enable the I/O port 60h/64h emulation support. This should be enabled for the complete USB keyboard legacy support for non-USB aware OSes. Configuration options: [Disabled] [Enabled] Z10PE-D16
  • Asus Z10PE-D16 10G-2T | User Guide - Page 88
    [Auto] This is the maximum time the device will take before it properly reports itself to the host controller. Configuration options: [Auto] [Manual] Mass Storage Devices Generic 8.07 [Auto] Allows you to select the mass storage device emulation type. Configuration options: [Auto] [Floppy] [Forced
  • Asus Z10PE-D16 10G-2T | User Guide - Page 89
    4.5 IntelRCSetup menu The IntelRCSetup menu items allow you to change the processor and chipset settings. Z10PE-D16 Series 4-25
  • Asus Z10PE-D16 10G-2T | User Guide - Page 90
    [Disabled] [Enabled] Execute Disable Bit [Enabled] XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS (Windows Server 2003 SP1, Windows XP SP2, SuSE Linux 9.2, Redhat Enterprise 3 Update 3). Configuration options: [Disabled] [Enabled] Enable Intel
  • Asus Z10PE-D16 10G-2T | User Guide - Page 91
    ] [Enabled] AES-NI [Enabled] This Item allows you to enable or disable the AES-NI support. Configuration options: [Disabled] [Enabled] Down Stream PECI [Disabled] This Item allows you to enable the PCIe Down Stream PECI writer. Configuration options: [Disabled] [Enabled] Z10PE-D16 Series 4-27
  • Asus Z10PE-D16 10G-2T | User Guide - Page 92
    4.5.2 Advanced Power Management Configuration Power Technology [Energy Efficient] This item allows you to enable power management features. Configuration options: [Disabled] [Energy Efficient] [Custom] Config TDP [Disabled] This item allows you to enable/disable the Config TDP. Configuration options
  • Asus Z10PE-D16 10G-2T | User Guide - Page 93
    selecting the QPI link frequency Configuration options: [Auto] [6.4 GT/s] [8.0 GT/s] [9.6 GT/s] QPI Link0p [Enable] Configuration options: [Disable] [Enable] QPI Link1 [Enable] Configuration options: [Disable] [Enable] Z10PE-D16 Series 4-29
  • Asus Z10PE-D16 10G-2T | User Guide - Page 94
    [Enabled] Allows you to enable or disable halt on mem Training Error. Configuration options: [Disabled] [Enabled] ECC Support [Auto] Allows you to enable or disable the ECC support. Configuration options: [Auto] [Disabled] [Enabled] Data Scrambling [Auto] Allows you to enable/disable data scrambling
  • Asus Z10PE-D16 10G-2T | User Guide - Page 95
    Disabled] Allows you to enable or disable RAS Modes. Enabling Sparing and Mirroring is not supported. In case enabled, Sparing will be selected. Configuration options: [Disabled] [Mirror] [ you to enable or disable Demand Scrub. Configuration options: [Disabled] [Enabled] Z10PE-D16 Series 4-31
  • Asus Z10PE-D16 10G-2T | User Guide - Page 96
    WA [Enabled] Use special table for TX_EQ and vendor specific cards. Configuration options: [Disabled] [Enabled] PCI-E ASPM Support (Global) [L1 Only] This option enables or disables the ASPM support for all downstream devices. Configuration options: [Disabled] [L1 Only] 4-32 Chapter 4: BIOS setup
  • Asus Z10PE-D16 10G-2T | User Guide - Page 97
    If enabled, LED/SGPIO hardware is attached. Configuration options: [Disabled] [Enabled] Support Aggressive Link Power Management [Enabled] Allows you to enable or disable the Suport 4 Allows you to enable or disable the SATA port Configuration options: [Disabled] [Enabled] Z10PE-D16 Series 4-33
  • Asus Z10PE-D16 10G-2T | User Guide - Page 98
    ] [RAID] SATA Mode options SATA LED locate [Enabled] If enabled, LED/SGPIO hardware is attached. Configuration options: [Disabled] [Enabled] Support Aggressive Link Power Management [Enabled] Allows you to enable or disable the Suport Aggressive Link Power (SALP) Management. Configuration options
  • Asus Z10PE-D16 10G-2T | User Guide - Page 99
    Server ME Configuration Displays the Server ME Technology parameters on your system. 4.5.10 Runtime Error Logging Support Runtime Error Logging Whea Support [Disabled] This item allows you to enable or disable the WHEA support. Configuration options: [Disabled] [Enabled] Z10PE-D16 Series 4-35
  • Asus Z10PE-D16 10G-2T | User Guide - Page 100
    4.6 Server Mgmt menu The Server Management menu displays the server management status and allows you to change the settings. OS Watchdog Timer [Disabled] This item allows you to start a BIOS timer which can only be shut off by Intel Management Software after the OS loads. Configuration options: [
  • Asus Z10PE-D16 10G-2T | User Guide - Page 101
    or dynamically (by BIOS or BMC). Unspecified option will not modify any BMC network parameters during BIOS phase. Configuration options: [Previous State] [Static] [DynamicBmcDhcp] [DynamicBmcNonDhcp] Z10PE-D16 Series 4-37
  • Asus Z10PE-D16 10G-2T | User Guide - Page 102
    View System Event Log This item allows you to view the system event log records. IPv6 BMC Network Configuration This item allows you to configure the parameter settings of IPv6 BMC network. IPv6 Display Full Field [Enable] Displays the full or brief IPv6 Field. Configuration options: [Disable] [
  • Asus Z10PE-D16 10G-2T | User Guide - Page 103
    enter IPv6 BMC LAN Link IP address. IPv6 BMC LAN Link IP Prefix Length Allows you to input IPv6 BMC Lan Link IP Prefix Length. Z10PE-D16 Series 4-39
  • Asus Z10PE-D16 10G-2T | User Guide - Page 104
    4.7 Event Logs menu The Event Logs menu items allow you to change the event log settings and view the system event logs. 4.7.1 Change Smbios Event Log Settings Press to change the Smbios Event Log configuration. All values changed here do not take effect until computer is restarted. Enabling
  • Asus Z10PE-D16 10G-2T | User Guide - Page 105
    to Standard Smbios Types (Not all may be translated). Configuration options: [Disabled] [Enabled] 4.7.2 View Smbios Event Log Press to view all smbios event logs. Z10PE-D16 Series 4-41
  • Asus Z10PE-D16 10G-2T | User Guide - Page 106
    appears only when CPU FAN1&2 FRNT FAN1 mode is set to [Manual Mode]. This item allows you to configure the fan duty setting from 10% to 100%. FRNT FAN2&3/4&5; REAR FAN1&2 mode [Generic Mode] Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan speeds for more efficient
  • Asus Z10PE-D16 10G-2T | User Guide - Page 107
    . To clear the administrator password, follow the same steps as in changing an administrator password, but press when prompted to create/confirm the password. Z10PE-D16 Series 4-43
  • Asus Z10PE-D16 10G-2T | User Guide - Page 108
    User Password To set a user password: 1. Select the User Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Confirm the password when prompted. To change a user password: 1. Select the User Password item and press . 2. From the
  • Asus Z10PE-D16 10G-2T | User Guide - Page 109
    )/ Key Exchange Key (KEK)/ Authorized Signatures (DB)/ Authorized TimeStamps (DBT)/ Forbidden Signatures (DBX) Configuration options: [Delete] [Set New] [Append] Configuration options: [Set New] [Delete] [Append] Z10PE-D16 Series 4-45
  • Asus Z10PE-D16 10G-2T | User Guide - Page 110
    4.10 Boot menu The Boot menu items allow you to change the system boot options. Setup Prompt Timeout [xx] Use the and keys to adjust the number of seconds to wait for setup activation key. Bootup NumLock State [On] Allows you to select the power-on state for the NumLock. Configuration
  • Asus Z10PE-D16 10G-2T | User Guide - Page 111
    The Tool menu items allow you to configure options for special functions. Select an item then press to display the submenu. ASUS EZ Flash Allows you to run ASUS EZ Flash BIOS ROM Utility when you press . Refer to the ASUS EZ Flash Utility section for details. Z10PE-D16 Series 4-47
  • Asus Z10PE-D16 10G-2T | User Guide - Page 112
    4.12 Exit menu The Exit menu items allow you to save or discard your changes to the BIOS items. Pressing does not immediately exit this menu. Select one of the options from this menu or from the legend bar to exit. Save Changes & Reset Exit System setup after saving the changes. Discard
  • Asus Z10PE-D16 10G-2T | User Guide - Page 113
    from the selected device. Launch EFI Shell from filesystem device Attempts to launch EFI Shell application (shellx64.efi) from one of the available filesystem devices. Z10PE-D16 Series 4-49
  • Asus Z10PE-D16 10G-2T | User Guide - Page 114
    4-50 Chapter 4: BIOS setup
  • Asus Z10PE-D16 10G-2T | User Guide - Page 115
    Chapter 5: RAID Configuration RAID Configuration This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. 5
  • Asus Z10PE-D16 10G-2T | User Guide - Page 116
    ROM Utility with RAID 0, RAID 1, RAID 10, and RAID 5 support (for Windows OS only). 5.1.1 RAID definitions RAID 0 (Data striping) disk drive included in a created RAID set, copy first the RAID driver from the support DVD to a floppy disk before you install an operating system to the selected hard
  • Asus Z10PE-D16 10G-2T | User Guide - Page 117
    1. Install the SATA hard disks into the drive bays following the instructions in the system user guide. 2. Connect a SATA signal cable to the signal connector at supported by the Intel® C612 chipset. Refer to the succeeding section for details on how to use the RAID configuration utility. Z10PE-D16
  • Asus Z10PE-D16 10G-2T | User Guide - Page 118
    (s) from SATA hard disk drives connected to the SATA connectors supported by the motherboard southbridge chip. To enter the LSI MegaRAID software utility, the boot priority of the SATA optical drive has to be manually adjusted. Otherwise, the system will not boot from the connected SATA ODD
  • Asus Z10PE-D16 10G-2T | User Guide - Page 119
    New. In Easy Configuration, the virtual drive parameters are set automatically. In New Configuration, you manually set the virtual drive parameters. Using Easy Configuration To create a RAID set using the Easy Keys to Navigate Between Items And Press Enter To Select An Option Z10PE-D16 Series 5-5
  • Asus Z10PE-D16 10G-2T | User Guide - Page 120
    2. The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Use the up/down arrow keys to select the drives you want to include in the RAID set, and then press . When selected, the drive indicator changes from READY to ONLIN A[X]-[Y], where X is the array number,
  • Asus Z10PE-D16 10G-2T | User Guide - Page 121
    Level RAID 0 RAID 1 Status ONLINE Choose RAID Level For This VD Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option Z10PE-D16 Series 5-7
  • Asus Z10PE-D16 10G-2T | User Guide - Page 122
    8. Select Units from the Virtual Drive sub-menu, and then press . 9. Select the units for virtual drive size from the menu, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured ManagemeLnDt
  • Asus Z10PE-D16 10G-2T | User Guide - Page 123
    #Stripes StripSz Status 0 1 148.580GB 2 64KB ONLINE Select Yes Or No Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option Z10PE-D16 Series 5-9
  • Asus Z10PE-D16 10G-2T | User Guide - Page 124
    Using New Configuration When a RAID set already exists, using the New Configuration command erases the existing RAID configuration data. If you do not want to delete the existing RAID set, use the View/Add Configuration command to view or create another RAID configuration. To create a RAID set
  • Asus Z10PE-D16 10G-2T | User Guide - Page 125
    drive displays at the bottom of the screen. 3. Follow step 3 to 12 of section 6.2.1 Creating a RAID set: Using Easy Configuration to add a new RAID set. Z10PE-D16 Series 5-11
  • Asus Z10PE-D16 10G-2T | User Guide - Page 126
    5.2.3 Initializing the virtual drives After creating the RAID set(s), you must initialize the virtual drives. You may initialize the virtual drives of a RAID set(s) using the Initialize or Objects command on the Management Menu. Using the Initialize command To initialize the virtual drive using the
  • Asus Z10PE-D16 10G-2T | User Guide - Page 127
    StripSz 0 In1it of 1V4D8.I5s80IGnB Proces2s 64KB VD 0 Initialization Complete. Press Esc.. 100% Completed Status ONLINE Virtual Drives Virtual Drive 0 SPACE-(De)Select, F10-Initialize Z10PE-D16 Series 5-13
  • Asus Z10PE-D16 10G-2T | User Guide - Page 128
    Using the Objects command To initialize the virtual drives using the Objects command 1. From the Management Menu, select Objects > Virtual Drive, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Objects Management MAednaupter
  • Asus Z10PE-D16 10G-2T | User Guide - Page 129
    And Press Enter To Select An Option 5. A progress bar appears on screen. If desired, press to abort initialization. When initialization is completed, press . Z10PE-D16 Series 5-15
  • Asus Z10PE-D16 10G-2T | User Guide - Page 130
    5.2.4 Rebuilding failed drives You can manually rebuild failed hard disk drives using the Rebuild command in the Management Menu. To rebuild a failed hard disk drive 1. From the Management Menu, select Rebuild,
  • Asus Z10PE-D16 10G-2T | User Guide - Page 131
    77247MB HDS72808PLA380 PF20A60A SPACE-(De)Select,F10-Start Rebuild,F2-Drive Information,F3-View Virtual Drives 4. When rebuild is complete, press any key to continue. Z10PE-D16 Series 5-17
  • Asus Z10PE-D16 10G-2T | User Guide - Page 132
    5.2.5 Checking the drives for data consistency You can check and verify the accuracy of data redundancy in the selected virtual drive. The utility can automatically detect and/or detect and correct any differences in data redundancy depending on the selected option in the Objects > Adapter menu. The
  • Asus Z10PE-D16 10G-2T | User Guide - Page 133
    consistency check. • Abort - Aborts the consistency check. When you restart checking, it continues from zero percent. 5. When checking is complete, press any key to continue. Z10PE-D16 Series 5-19
  • Asus Z10PE-D16 10G-2T | User Guide - Page 134
    Using the Objects command To check data consistency using the Objects command 1. From the Management Menu, select Objects, and then select Virtual Drive from the sub-menu. 2. Use the arrow keys to select the virtual drive you want to check, and then press . 3. Select Check Consistency from
  • Asus Z10PE-D16 10G-2T | User Guide - Page 135
    Cursor Keys To Navigate Between Items And Press Enter To Select An Option The utility clears all the current array(s). 3. Press any key to continue. Z10PE-D16 Series 5-21
  • Asus Z10PE-D16 10G-2T | User Guide - Page 136
    5.2.7 Selecting the boot drive from a RAID set You must have created a new RAID configuration before you can select the boot drive from a RAID set. See section 6.2.1 Creating a RAID set: Using New Configuration for details. To select the boot drive from a RAID set 1. From the Management Menu, select
  • Asus Z10PE-D16 10G-2T | User Guide - Page 137
    5.2.8 Enabling WriteCache You may manually enable the RAID controller's WriteCache option after creating a RAID set to improve the data transmission performance. When you Navigate Between Items And Press Enter To Select An Option 5. When finished, press any key to continue. Z10PE-D16 Series 5-23
  • Asus Z10PE-D16 10G-2T | User Guide - Page 138
    to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. Before you proceed, ensure that you have installed the Serial ATA hard disk drives, have set the correct jumper settings of the
  • Asus Z10PE-D16 10G-2T | User Guide - Page 139
    the selection bar then press to select a disk. A small triangle before the Port number marks the selected drive. Press when you are done. Z10PE-D16 Series 5-25
  • Asus Z10PE-D16 10G-2T | User Guide - Page 140
    6. Use the up/down arrow keys to select the stripe size for the RAID array (for RAID 0, 10 and 5 only) then press . The available stripe size values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for
  • Asus Z10PE-D16 10G-2T | User Guide - Page 141
    VERIFICATION ] ALL DATA IN THE VOLUME WILL BE LOST! (This does not apply to Recovery volumes) Are you sure you want to delete volume "Volume0"? (Y/N): Z10PE-D16 Series 5-27
  • Asus Z10PE-D16 10G-2T | User Guide - Page 142
    5.3.3 Resetting disks to Non-RAID Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive. To reset a RAID set: 1. From the utility main menu, select 3. Reset Disks to Non-RAID and press <
  • Asus Z10PE-D16 10G-2T | User Guide - Page 143
    Model Serial # Size X XXXXXXXXXXX XXXXXXXX XXX.GB [ ]-Previous/Next [ENTER]-Select [ESC]-Exit Select a destination disk with the same size as the original hard disk. Z10PE-D16 Series 5-29
  • Asus Z10PE-D16 10G-2T | User Guide - Page 144
    3. The utility immediately starts rebuilding after the disk is selected. When done, the status of the degraded RAID volume is changed to "Rebuild". Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023 Copyright(C) 2003-12 Intel Corporation. All Rights Reserved. [ MAIN MENU ]
  • Asus Z10PE-D16 10G-2T | User Guide - Page 145
    Chapter 4 for more details. 4. From the Exit menu, select Save Changes & Exit, then press . 5. When the confirmation window appears, select Yes, then press . Z10PE-D16 Series 5-31
  • Asus Z10PE-D16 10G-2T | User Guide - Page 146
    disk drives that are connected to the Serial ATA connectors supported by the Southbridge. You need to manually install the Intel® Rapid Storage Technology enterprise utility on a Windows® operating system. Please refer to the installation instructions in Chapter 6. To enter the Intel® Rapid Storage
  • Asus Z10PE-D16 10G-2T | User Guide - Page 147
    data on one of the selected disks, select NO when prompted. • If you want to Enable volume write-back cache or Initialize volume, click Advanced. Z10PE-D16 Series 5-33
  • Asus Z10PE-D16 10G-2T | User Guide - Page 148
    6. Confirm the volume creation, than click Create Volume to continue. This process could take a while depending on the number and size of the disks. You can continue using other applications during this time. 7. Wait until the process is completed, then click OK when prompted. You still need to
  • Asus Z10PE-D16 10G-2T | User Guide - Page 149
    RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. Z10PE-D16 Series 5-35
  • Asus Z10PE-D16 10G-2T | User Guide - Page 150
    5.4.3 Deleting a volume Be cautious when deleting a volume. You will lose all data on the hard disk drives.Before you proceed, ensure that you back up all your important data from your hard drives. To delete a volume: 1. From the utility main menu, select the volume (exp. Volume_0000) in Volumes
  • Asus Z10PE-D16 10G-2T | User Guide - Page 151
    , or errors here. E-Mail Preferences Allow you to set to sent e-mail of the following events: • Storage system information • Storage system warnings • Storage system errors Z10PE-D16 Series 5-37
  • Asus Z10PE-D16 10G-2T | User Guide - Page 152
    5-38 Chapter 5: RAID configuration
  • Asus Z10PE-D16 10G-2T | User Guide - Page 153
    Chapter 6: Driver installation Driver installation This chapter provides the instructions for installing the necessary drivers for different system components in both Linux® and Windows® Operating Systems. 6
  • Asus Z10PE-D16 10G-2T | User Guide - Page 154
    SATA optical disk drive has to be manually adjusted. Otherwise, the system will not boot ® environment 1. Start Windows®. 2. Place the motherboard support DVD into the optical drive. 3. Go to the floppy disk drive. 5. Follow succeeding screen instructions to complete the process. Write-protect the
  • Asus Z10PE-D16 10G-2T | User Guide - Page 155
    Windows® Server 2008 R2 OS 1. Boot the computer using the Windows® Server 2008 R2 OS installation disc. Follow the screen instructions to start installing Windows Server 2008 R2. 2. When prompted to choose a type of installation, click Custom (advanced). 3. Click Load Driver. Z10PE-D16 Series 6-3
  • Asus Z10PE-D16 10G-2T | User Guide - Page 156
    and replace with the motherboard Support DVD into the optical drive. Click Browse to driver in the corresponding folder of the Support DVD then click OK to continue. 6. finishes loading the RAID driver, replace the motherboard Support DVD with the Windows Server installation disc. Select
  • Asus Z10PE-D16 10G-2T | User Guide - Page 157
    Insert your driver disk into /dev/fd0 and press "OK" to continue. OK Back The drivers for the RAID card are installed to the system. Z10PE-D16 Series 6-5
  • Asus Z10PE-D16 10G-2T | User Guide - Page 158
    drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 6. Follow the onscreen instructions to finish the OS installation. 7. When the installation is completed, DO NOT click Reboot. Press + + to switch to the command
  • Asus Z10PE-D16 10G-2T | User Guide - Page 159
    , press to give the third party driver. Enter the following command at the boot: Linux dd blacklist=isci blacklist=ahci nodmraid, then press . Z10PE-D16 Series 6-7
  • Asus Z10PE-D16 10G-2T | User Guide - Page 160
    4. Select Yes using the key when asked if you have the driver disk, then press . Main Menu Do you have a driver disk? Yes No 5 . You have multiple devices which could serve as source for a driver disk. Choose one you like to use and select OK, then press . Driver Disk Sou8rce
  • Asus Z10PE-D16 10G-2T | User Guide - Page 161
    RAID controller drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 8. Follow the onscreen instructions to finish the OS installation. Z10PE-D16 Series 6-9
  • Asus Z10PE-D16 10G-2T | User Guide - Page 162
    Preparing the Linux Driver Ensure that there is another computer with a Linux-based OS to create the RAID driver. When creating the RAID driver, you may refer to the examples below which uses a 64bit SUSE Linux system to create a 64bit RAID driver for SUSE11 sp1. 1. Copy the image file into the
  • Asus Z10PE-D16 10G-2T | User Guide - Page 163
    OS installation CD. 2. Use the arrow keys to select Installation from the Boot Options menu. 3. Press , then select Yes from the menu. Press . Z10PE-D16 Series 6-11
  • Asus Z10PE-D16 10G-2T | User Guide - Page 164
    medium. Select OK, then press . Please choose the Driver Update medium. sda: USB Floppy other device OK Back 6. Select Back and follow the onscreen instructions to finish the installation. 6-12 Chapter 6: Driver installation
  • Asus Z10PE-D16 10G-2T | User Guide - Page 165
    the support DVD. The main screen of the Support DVD contains the following tabs: 1. Drivers 2. Utilities 3. MakeDisk 4. Manual 5. Contact The main screen of the Support DVD looks exactly the same on the Windows® Server 2008 R2 and on the Windows® Server 2012 Operating System (OS). Z10PE-D16 Series
  • Asus Z10PE-D16 10G-2T | User Guide - Page 166
    installed devices. Install the necessary drivers to activate the devices. 6.3.2 Utilities menu tab The Utilities menu displays the software applications and utilities that the motherboard supports. 6-14 Chapter 6: Driver installation
  • Asus Z10PE-D16 10G-2T | User Guide - Page 167
    disks. Press the arrow down button in the lower part of the menu to view more items. 6.3.4 Manual menu The Manual menu provides the link to the Broadcom NetXtreme II Network Adapter user guide. You need an internet browser installed in your OS to view the User Guide. Z10PE-D16 Series 6-15
  • Asus Z10PE-D16 10G-2T | User Guide - Page 168
    6.3.5 Contact information menu The Contact menu displays the ASUS contact information, e-mail addresses, and useful links if you need more information or technical support for your motherboard. 6-16 Chapter 6: Driver installation
  • Asus Z10PE-D16 10G-2T | User Guide - Page 169
    of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the support DVD. 3. Click the item Intel Chipset Device Software from the menu. 4. The Intel(R) Chipset Device Software window appears. Click Next to start installation. Z10PE-D16 Series 6-17
  • Asus Z10PE-D16 10G-2T | User Guide - Page 170
    5. Select Yes to accept the terms of the License Agreement and continue the process. 6. Read the Readme File Information and press Next to continue the installation. 7. Toggle Yes, I want to restart the computer npw and click Finish to complete the setup process. 6-18 Chapter 6: Driver
  • Asus Z10PE-D16 10G-2T | User Guide - Page 171
    driver This section provides the instructions on how to install the support DVD. 4. Click Intel® I350-AM1/I350-AM2/I210/X540-BT2 Gigabit Adapters Drivers in the Drivers menu of the main screen to start the installation. 5. Click Install Drivers and Software option to begin installation. Z10PE-D16
  • Asus Z10PE-D16 10G-2T | User Guide - Page 172
    6. Click Next when the Intel(R) Network Connections-InstallShield Wizard window appears. 7. Tick I accept the terms in the license agreement and click Next to continue. 8. From the Setup Options window, click Next to start the installation. By default, Intel(R) PROSet for Windows Device Manager and
  • Asus Z10PE-D16 10G-2T | User Guide - Page 173
    9. Click Install to start the installation. 10. When the installation is done, press Finish to complete the installation. Z10PE-D16 Series 6-21
  • Asus Z10PE-D16 10G-2T | User Guide - Page 174
    This section provides the instructions on how to install the ASPEED Video Graphics Adapter (VGA) driver. You need to manually install the ASPEED Administrator privileges. 2. Insert the motherboard/system support DVD to the optical drive. The support DVD automatically displays the Drivers menu if
  • Asus Z10PE-D16 10G-2T | User Guide - Page 175
    5. Click Install to proceed with the installation. 6. Click Finish to complete the installation. Z10PE-D16 Series 6-23
  • Asus Z10PE-D16 10G-2T | User Guide - Page 176
    6.7 Intel® Rapid Storage Technology enterprise 4.0 installation This section provides the instructions on how to install the Intel® Rapid Storage Technology enterprise 4.0 on the system. You need to manually install the Intel® Rapid Storage Technology enterprise 4.0 utility on a Windows®
  • Asus Z10PE-D16 10G-2T | User Guide - Page 177
    5. Read the Warning message and click Next to continue. 6. Read the License Agreement and click Yes to continue. 7. Read the Readme File Information and click Next to continue. Z10PE-D16 Series 6-25
  • Asus Z10PE-D16 10G-2T | User Guide - Page 178
    8. After completing the installation, click Next to complete the setup process. 9. Select Yes, I want to restart my computer now and click Finish to restart your computer before using the program. 6-26 Chapter 6: Driver installation
  • Asus Z10PE-D16 10G-2T | User Guide - Page 179
    Appendix A: Reference Information Reference Information This appendix includes additional information that you may refer to when configuring the motherboard. A
  • Asus Z10PE-D16 10G-2T | User Guide - Page 180
    A.1 Z10PE-D16 Series block diagram Z10PE-D16/10G-2T A-2 Appendix A: Reference information
  • Asus Z10PE-D16 10G-2T | User Guide - Page 181
    Z10PE-D16/4L Z10PE-D16 Series A-3
  • Asus Z10PE-D16 10G-2T | User Guide - Page 182
    Z10PE-D16 A-4 Appendix A: Reference information
  • Asus Z10PE-D16 10G-2T | User Guide - Page 183
    11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail [email protected] Web site http://www.asus.com.tw Technical Support Telephone Online Support +886-2-2894-3447 (0800-093-456) http://support.asus.com/techserv/techserv.aspx ASUSTeK COMPUTER INC. (China) Address No.508
  • Asus Z10PE-D16 10G-2T | User Guide - Page 184
    Fax +49-2102-959911 Web site http://www.asus.de Online contact http://www.asus.de/sales Technical Support Telephone +49-1805-010923 Support Fax +49-2102-959911 Online support http://support.asus.com/techserv/techserv.aspx ASUS Czech Service s.r.o. (Europe) Address Na Rovince 887, 720 00
  • Asus Z10PE-D16 10G-2T | User Guide - Page 185
    Sp. z o.o. (Poland) Address Ul. Postępu 6, 02-676 Warszawa, Poland Web site http://pl.asus.com Technical Support Telephone Online Support +48-225718033 http://support.asus.com/techserv/techserv.aspx ASK-Service (Russia and CIS) Address 10 Telephone (495) 640-32-75 Web site http://ru
  • Asus Z10PE-D16 10G-2T | User Guide - Page 186
    name : ASUSTeK COMPUTER INC. 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Motherboard Z10PE-D16;Z10PE-D16/4L; Z10PE-D16/10G-2T; Z10PE-D16/10G-1T conform with the essential requirements of the following directives: 2004/108/EC-EMC
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
Z10PE-D16 Series