Asus Z10PE-D16 10G-2T User Guide - Page 51
Internal connectors, Serial ATA 6.0 Gbps connectors, pin SATA1, SATA2, SATA6 [Light Blue]
View all Asus Z10PE-D16 10G-2T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
2.8.2 Internal connectors 1. Serial ATA 6.0 Gbps connectors (7-pin SATA1, SATA2, SATA3, SATA4, SATA5, SATA6 [Light Blue], SSATA1, SSATA2, SSATA3 [Gray], SSATA4 [Light Gray]) Supported by the Intel® C612 series Chipset, these connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allows up to 6 Gbps of data transfer rate. If you installed Serial ATA hard disk drives, you can use a software RAID solution to create a RAID 0, RAID 1, RAID 5, or a RAID 10 configuration. For more information on the SATA RAID solutions supported on this motherboard, refer to the RAID Configuration chapter of this user guide. • The actual data transfer rate depends on the speed of Serial ATA hard disks installed. • The SSATA4 [Light Gray] will be automatically turned off if the M.2 connector (NGFF) is occupied. Z10PE-D16 Series 2-33