Asus Z170-E Z170-E Users manual English - Page 35

• The plugged USB 3.0 device will run on xHCI mode. • USB 3.0 devices can only be used for data storage. • We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance from your USB 3.0 devices. • Due to the design of the Intel® chipset, all USB devices connected to the USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. • Multi-VGA output supports up to three displays under Windows® OS environment, two displays under BIOS, and one display under DOS. • Intel display architecture design supports the following maximum supported pixel clocks (Pixel Clock = H total x V Total x Frame Rate (Screen refresh rate): - DVI port: 148 MHz - HDMI port: 300 MHz * LAN ports LED indications Activity Link LED Speed LED Status Description Status Description Off No link Off 10 Mbps connection Orange Linked Orange 100 Mbps connection Orange (Blinking) Data activity Green 1 Gbps connection Orange (Blinking Ready to wake up then steady) from S5 mode ACT/LINK SPEED LED LED LAN port ** Audio 2.1, 4.1, 5.1, or 7.1-channel configuration Port Light Blue Lime Pink Orange Gray Black Headset 2.1-channel Line In Line Out Mic In - - - 4.1-channel Line In Front Speaker Out Mic In - - Rear Speaker Out 5.1-channel Line In Front Speaker Out Mic In Center/Subwoofer - Rear Speaker Out 7.1-channel Side Speaker Out Front Speaker Out Mic In Center/Subwoofer Side Speaker Out Rear Speaker Out ASUS Z170-E Series 1-23