Asus Z77-A Z77-A User's Manual - Page 41
Serial ATA 6.0 Gb/s connectors 7-pin SATA6G 1~6 - raid
View all Asus Z77-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND 4. Serial ATA 6.0 Gb/s connectors (7-pin SATA6G 1~6) These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 5, or RAID 10 configuration through the onboard controller. Z77-A SATA6G_2 SATA6G_1 Z77-A Intel® SATA 6.0Gb/s connectors • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 2.5.3 SATA Configuration for details. • When using NCQ, please check the SATA Mode in the BIOS is [AHCI Mode]. Refer to 2.5.3 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions. ASUS Z77-A 1-29