Asus Z97-E USB 3.1 User Guide - Page 32
Intel, Z97 Serial ATA 6.0Gb/s connector 7-pin SATA6G_5, SATA6G_6, SATAEXPRESS
View all Asus Z97-E USB 3.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
11. Intel® Z97 Serial ATA 6.0Gb/s connector (7-pin SATA6G_5, SATA6G_6, SATAEXPRESS) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z97 chipset. Z97-E/USB 3.1 SATA6G_5 SATA6G_6 GND RSATA_TXP5 RSATA_TXN5 GND RSATA_RXN5 RSATA_RXP5 GND GND RSATA_TXP6 RSATA_TXN6 GND RSATA_RXN6 RSATA_RXP6 GND Floating Device_Reset GND Detection SATAEXPRESS Z97-E/USB 3.1 Intel® SATA 6 Gb/s connectors • These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID]. Refer to section 2.6.3 PCH Storage Configuration for details. • Before creating a RAID set, refer to the manual bundled in the motherboard support DVD. • The M.2 Socket 3 and SATA Express slot share the same PCIe bandwidth. When you use both connectors, the system automatically detects the devices connected to these connectors and set a higher priority to M.2 Socket 3 than SATA Express slot. • The SATAEXPRESS connector can support one SATA Express device or two SATA devices. 1-22 Chapter 1: Product introduction