Asus Z97-E User Guide - Page 91
Platform Misc Configuration, Legacy USB Support [Enabled], Intel xHCI Mode [Smart Auto] - usb 3 1 drivers
View all Asus Z97-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Legacy USB Support [Enabled] [Disabled] Your USB devices can be used for BIOS setup only and cannot be recognized in the boot devices list. [Enabled] Your system supports the USB devices in legacy operating systems. [Auto] Your system automatically detects the presence of USB devices at startup. If any USB devices are detected, the legacy USB support is enabled. Intel xHCI Mode [Smart Auto] [Auto] The xHCI is automatically enabled and runs at USB 3.0 mode when the xHCI driver is installed in the operating system. [Smart Auto] Upon detection, the xHCI driver supports the USB 3.0 mode during both POST and operating system. [Enabled] Enables the xHCI controller. [Disabled] Disables the xHCI controller. EHCI Hand-off [Disabled] [Enabled] Enables the support for operating systems without an EHCI hand‑off feature. [Disabled] Disables the EHCI Hand-off support. Mass Storage Devices [Auto] This item allows your system to detect the devices according to their media formats. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM] USB Single Port Control This item allows you to enable or disable the individual USB ports. Refer to section 1.2.2 Motherboard layout for the location of the USB ports. 3.6.6 Platform Misc Configuration The items in this menu allow you to configure the platform-related features. Chapter 3 ASUS Z97-E 3-39