Asus Z9PH-D16 User Guide - Page 37
Connecting the Intel® ASRK1 Module (Optional), Upgrade Kit table for Intel SCU
View all Asus Z9PH-D16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2.5.5 Connecting the Intel® ASRK1 Module (Optional) Follow the steps below to connect the ASRK1 Module to the connector on your motherboard. 1. Locate the ASRK connector on the motherboard. 2. Connect the ASRK1 module to the connector. ASRK module support ASRK#1 and #2 only. Upgrade Kit table for Intel SCU Protocol Enabled W/O ASRK SATA (3Gb/s) ASRK #1 SATA/SAS (3Gb/s) ASRK #2 SATA/SAS (3Gb/s) Ports 4 ports 4 ports 4 ports Intel RSTe SAS RAID 5 SATA RAID 5 No Yes For detail of Intel® Rapid Storage Technology utility, please refer to Chapter 6 RAID Configuration. Changing the module for different RAID settings: 1. Power off the system and disengage the original module. 2. Reboot the system to enter OS. 3. After the system successfully enters the OS, power off again. 4. Put the intended module in place and reboot the system. 5. The system will automatically detect the different RAID settings. ASUS Z9PH-D16, Z9PH-D16/FDR 2-19