Asus ZenWiFi XT9 2PK QSG Quick Start Guide - Page 1

Quick Start Guide ASUS ZenWiFi XT9 AX7800 Tri Band WiFi Router Model: XT9 Before Setup Preparing to set up an AiMesh WiFi system 1 Find two ZenWiFi XT9, and power both on. 2 Use a network cable to connect your optical modem to the WAN port of either ZenWiFi XT9. This ZenWiFi XT9 will be the AiMesh router, and the other ZenWiFi XT9 will be the AiMesh node. 3 The LED turns solid blue to indicate that ZenWiFi XT9 is ready for setup. ASUS Router App Download free ASUS Router APP to set up and manage your router(s). Hardware Explanations 1 Plug the adapter into the DCIN port, and press the power switch. 2 The power LED will light up when your hardware is ready. ZenWiFi XT9 Overview DCIN port Power switch LAN ports 1-3 USB 3.2 Gen 1x1 2.5G / 1G WAN port 2.5G / 1G WAN port Connect your optical modem to this port with a network cable. LAN ports 1-3 Connect your PC to a LAN port with a network cable. Specifications: DC Power adapter Operating Temperature Operating Humidity DC Output: +12V with max 3A current 0~40oC Storage 0~70oC 50~90% Storage 20~90% AiMesh node AiMesh router AiMesh Setup Steps AiMesh Setup Steps 01 Prepare Place your AiMesh router and node within 3 meters of each other during the setup process. 02 AiMesh node Keep your AiMesh node powered on and standby for AiMesh system settings. within 3 meters AiMesh node AiMesh router 03 Launching ASUS Router APP Launch ASUS Router APP, and then follow the on-screen instructions to finish the AiMesh setup. Troubleshooting NOTE: W hen you're using a wireless backhaul to connect your router and AiMesh node, the WAN port on your AiMesh node can be used as a LAN port providing up to 2.5G transmission speed. If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following and try again. a Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters. b Your AiMesh node is powered on.