Asus p4pe2x P4PE2-X User Manual - Page 21

Expansion slots - driver

Get Asus p4pe2x PDF manuals and user guides View all Asus p4pe2x manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

1.7.4 Installing a DIMM Follow these steps to install a DIMM. 1. Unlock a DIMM socket by pressing the retaining clips outward. 2. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. 3. Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated. DDR DIMM Unlocked • A DDR DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM. • Install only qualified DDR DIMMs on this motherboard. See Table 3. 1.8 Expansion slots To install and configure an expansion card: 1. Install an expansion card following the instructions that came with the chassis. 2. Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for BIOS information. 3. Assign an IRQ to the card. Refer to the tables next page. 4. Install the drivers and/or software applications for the expansion card according to the card documentation. A* TShUeSsePIR4QPsE2ar-eXumsuoatlhlyearvbaoilabrdle for ISA or PCI devices. 1-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
ASUS P4PE2-X motherboard
1-11
1.8
Expansion slots
To install and configure an expansion card:
1.
Install an expansion card following the instructions that came with the chassis.
2.
Turn on the system and change the necessary BIOS settings, if any. See
Chapter 2 for BIOS information.
3.
Assign an IRQ to the card. Refer to the tables next page.
4.
Install the drivers and/or software applications for the expansion card
according to the card documentation.
* These IRQs are usually available for ISA or PCI devices.
1.7.4
Installing a DIMM
Follow these steps to install a DIMM.
1.
Unlock a DIMM socket by pressing the
retaining clips outward.
2.
Align a DIMM on the socket such that the
notch on the DIMM matches the break on
the socket.
3.
Firmly insert the DIMM into the socket
until the retaining clips snap back in place
and the DIMM is properly seated.
•
A DDR DIMM is
keyed with a notch so that it fits in only one direction. DO
NOT force a DIMM into a socket to avoid damaging the DIMM.
•
Install only qualified DDR DIMMs on this motherboard. See Table 3.
Unlocked
DDR DIMM