Audiovox 122-2 Owners Manual - Page 15
Channel Scan, Operation
UPC - 044476012372
View all Audiovox 122-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Channel Scan Operation This feature allows you to monitor all channels automatically for valid signals. While scanning, you can transmit and receive. When a signal is received, the scan is interrupted and will return to scan mode approximately 5 seconds after reception is terminated. NOTE: While the SCAN mode is active, the MODE button is inoperative. In addition, the scan mode will reduce the overall battery life since the battery save function is overridden. To enable the channel scan mode: - From GMRS/FRS standby mode, momentarily press the Power On/Off Button; SCAN will appear on the LCD display. - The radio will automatically display each channel (1-22) in ascending order to find an active main channel. - When the unit doesn't find any signals and you want to transmit, press the PTT Button to return to primary channel operation. The transceiver will automatically resume scanning approximately 15 seconds after the communication is completed. - If there is no activity and you want to leave the scan mode, press the Power On/Off button momentarily and the unit will return to normal op eration; the SCAN icon will disappear from the LCD display. 15