Audiovox ANT1500 User Guide - Page 3
Coaxial Cable Installation Precautions
View all Audiovox ANT1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Getting Started English ANT1500 Built-In Coaxial Cable 2 Converter Box 3a Audio/Video -or- Coaxial 3b Cables Cable TV To connect the ANT1500 to a converter box: 1. Make sure your converter box is turned off. 2. Connect the ANT1500's built-in coaxial cable to the antenna input on your converter box. 3. Connect the converter box to your TV using either audio/video cables or a coaxial cable: a. Audio/Video cable connection: Connect the video (yellow) and stereo audio (red and white) cables to the video and audio outputs on your converter box. Connect the other ends to the video and audio inputs on your TV. Make sure you match the colors of the jacks on each- yellow plug to yellow jack, red plug to red jack, and white plug to white jack. b. Coaxial cable connection: Connect a coaxial cable to the antenna input on your converter box. Connect the other end of the coaxial cable to the antenna input on your TV. Notes: See your converter box's owner's manual for more detailed connection instructions. For additional information about setting up your converter box, visit www.keepmytv.com Coaxial Cable Installation Precautions • Do not bend coaxial cables into less than a three-inch radius. Tighter bends can cause shorts and can change a cable's impedance. • Do not install a coaxial cable where it will have a pulling tension greater than 15 pounds during installation. After installation, make sure there is no tension on the cable. • Use only round-headed staples. Any clamps or securing devices used with coax should grip the cable evenly about the circumference without crushing the cable. Flat staples can damage the coaxial cable. • Do not expose a coaxial cable to a temperature greater than 176 degrees Fahrenheit. Keep the cable away from heating vents and water heaters.