Audiovox ARE05 Setup Guide - Page 1
Audiovox ARE05 - Acoustic Research - Headphones Manual
UPC - 044476046285
View all Audiovox ARE05 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Welcome! Congratulations on your purchase of the ARE05 Noise-Isolating Earphones. These earphones give you detailed, accurate sound across the full frequency range while isolating outside noise naturally with a custom-fitting in-ear design. What's in the package? Before you get started with these earphones, take a moment to get familiar with the package contents. • Noise-isolating earphones • 3 silicone earbud sleeves (Small, Medium and Large) • 3 foam earbud sleeves (Small, Medium and Large) • Carrying case • User's guide Inserting your earphones Individual AR earphones are designed specifically for either the left or right side. Make sure you find the left (L) or right (R) L marking on the inside of each earphone so Left marking you know which side is which. Make sure the sleeves cover the end of the sleeve earphone stems. stem Finally, gently insert your earphones in each ear, just far enough that they fit securely-do not push beyond the ear canal opening! Note: Once you've put on your earphones, use the cord adjuster to increase or decrease the amount of slack in the cord. These earphones come with the medium sized silicone sleeves installed. If these don't fit the way you want them to, try a different size or material-the next section tells you how to change sleeves. Choosing and changing sleeves Experiment with the different sizes and materials in this package to find the right sleeves for you. Changing the sleeves is easy. 1. To remove the sleeve on the earphone, pull gently on one sides of the sleeve at the base of the stem until the sleeve comes off. 2. Position the replacement sleeve at a slight downward angle over the earphone stem. Gently push the sleeve up and onto the stem until it fits securely in place. 3. Push the end of the sleeve gently to make sure it covers the stem completely. Which material is right for you? Foam sleeves eventually adjust to the contours of your ear, giving you the tightest fit and most noise isolation. Silicone sleeves are easier to clean and generally more comfortable for activities like exercise. Connecting to your audio device 1. Turn the volume of your audio device all the way down. 2. Plug the earphone mini-plug into the headphone jack on your audio device. 3. Put on your earphones. 4. Turn up the audio device volume slowly. Listen safely! Enjoy your earphones at a safe volume. Avoid or limit the amount of time you listen at higher volumes-permanent hearing loss may occur if the earphones are used at too high a volume. If you experience a ringing in your ears, or your own voice and other sounds seem muffled, stop using the earphones and consult a hearing professional. Important: Do not use these earphones when operating a motor vehicle or in any environment where the inability to hear outside sounds may present a danger to you or to others. Sounds that you usually rely on as reminders or warnings may seem unfamiliar when using earphones. If you plan to use earphones around sounds like these, make sure you know how to recognize the sounds with your earphones on.