Audiovox AW877 Operation Manual - Page 6

Connecting the Speaker System Powering the Transmitter Connect the small, round plug from the transmitter AC power adapter to the transmitter's power input jack. Plug the other end of the transmitter AC power adapter into any standard 120V AC wall outlet. Transmitter Note: Be sure to use the AC power adapter rated 12V DC 100 mA. AC Power Adapter 120V AC wall outlet Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged in and powered at all times. If you will not be using the AW877 for an extended period of time, unplug the transmitter AC power adapter. Connecting to an Audio Source Connecting to an A/V Receiver Transmitter A/V Receiver 1. Connect the included "Y" adapter cable to the 3.5mm mini-plug cable coming out of the transmitter. Audio Input Cable Audio Output "Y" adapter cable Connecting to a TV 2. Connect the left (white) and right (red) audio plugs on the "Y" adapter cable to the corresponding left and right audio outputs of your A/V receiver, amp or other audio source. TV Transmitter 1. Connect the included "Y" adapter cable to the 3.5mm mini-plug cable coming out of the transmitter. Audio Input Cable Audio Output "Y" adapter cable 2. Connect the left (white) and right (red) audio plugs on the "Y" adapter cable to the corresponding left and right audio outputs on the TV. Connecting to a Stereo or Computer Transmitter Audio Input Cable  Stereo 1/4" headphone adapter Plug the cable coming out of the transmitter into the headphone output of your stereo or the audio output jack on your computer. Use the included 1/4" headphone adapter to convert the 3.5mm plug to a 1/4" plug as needed.