Audiovox AWD510 Owners Manual - Page 5

Transmitter (back panel) DC IN COAXIAL OPTICAL LINE IN 2. Charge the headset. Unhook the charging cable on the transmitter's back panel. Charging cable hook Plug the end of the charging cable into the recharging jack on the right headphone. While the headphones are charging, the LED on the left headphone remains red. This LED turns off when the headphones are fully charged. Note: To get the most from your headphones' battery, make sure you let the headphones charge completely before you used them for the first time. Note: Make sure the transmitter is off while you charge the headphones. Connection to the Audio Source The 2.4GHz wireless transmitter supports Dolby Digital 5.1 encoding through the digital optical and digital coaxial inputs. It also offers an analog connection through the LINE IN jack. Connecting to a digital optical or digital coaxial output Transmitter (back panel) DC IN COAXIAL OPTICAL LINE IN 1. Plug the digital optical or digital coaxial cable into the corresponding output jack on your audio source. 2. Connect the other end of the digital optical or digital coaxial cable to the OPTICAL or COAXIAL jack on the transmitter's back panel. Digital coaxial cable -OR- Digital optical cable Digital coaxial jack on audio source Optical jack on audio source