Audiovox DKP102 Installation Manual - Page 7

Main Features Front Panel Controls 12 3 4 5 67 8 POWER SOURCE AUTO PRO. TV CHANNEL VOLUME BASS BOOST MESSAGE PLAY RADIO TUNE REC OPEN RADIO BAND/AlARM OFF CLOCK SET STORE CLOCK MODE TIMER MESSAGE MIC 20 19 18 17 16 15 14 13 12 11 10 9 1. Power Indicator- Bright red when power is on. 2. Power Button - To turn the DKP102 on or off. 3. Source Button - Press this button to select from the four available sources DVD, TV , AV, Radio. 4. Auto Pro. Button - When this button is pressed, all TV channels are searched and channels that are detected with signals of sufficient levels are automatically stored in memory. 5. LCD Display Window - The LCD display shows the current time, source selected and radio station. 6. Record Button - Press this button to record up to a 2 minute message. 7. Play Button - Press this button to playback the recorded message. 8. Numeric Buttons (1-5) - Used to recall the radio presets. 9. Mic - Microphone used for message recording . 10. Message Indicator - Flashes to indicate a message is waiting. 11. Timer Button - Used to set the timer function and turn off the timer buzzer when activated. 12. Clock Mode Button - Used to select the clock or alarm item to be set. 13. Store Button - Used to set the AM/FM presets into memory. 14. Radio Tune/Clock Set - In Standby mode these buttons are used for setting hours, minutes, and to select from 12 and 24 hour mode. - In operation mode these buttons are used for radio tuning Up and Down. 15. Radio Band / Alarm Off Button - Radio Band selector. (Between FM1, FM2 and AM) Press this button to turn off the alarm when activated. 16. Open Button - Used to unlock the shuttle housing. 17. Bass Boost Button - Used to increase the low frequency (Bass) response. 18. Volume Up/Down Button - Used to increase and decrease the volume level. 19. Channel Up/Down Button - Used to go to the next channel Up or Down. 20. Sensor Cover - Allows the remote control to operate the DKP102 and the installed shuttle (DT102, DT85, DT7). 5