Audiovox DPF711K User Guide - Page 8

HB-711-OM-128-8270-Eng.qxp 6/5/08 9:37 AM Page 8 INSTALLATION (cont'd) homebase Unit Angle Bracket Mounting Holes DC Input Connector Wire Post(s) Power Adapter Wire Notches Bracket Upper Mounting Tabs Bracket Lower Mounting Tabs Angle Mount Brackets Countertop Installation 1. Find a suitable location on the countertop near an AC wall outlet. 2. Connect the power adapter plug to the DC input connector at the rear of the homebase. 3. Determine how best to route the power adapter wire in reference to the AC wall outlet - to the left or right side of the homebase - and slip the DC wire into the corresponding wire notch on the back of the unit. 4. Check the amount of wire required to reach the AC outlet; spool any excess wire onto the four posts inside the rear hollow of the homebase. 5. Attach each angle mount bracket to the homebase by lining up the individual angle mount bracket upper mounting tab with its corresponding hole on the homebase. 6. Push each angle mount bracket towards the top of the homebase until the upper mounting tab engages the mounting hole slot; when the bottom of the angle bracket contacts the homebase, the tab on the bottom of the angle bracket snaps into place. 7. Place the homebase in the desired location. 8 DPF711K