Audiovox FDTVO Owners Manual - Page 12

FDTVO Connecting the FDTVO to a TV FDTVO Coaxial Cable Amplifier Insert ANTENNA TV/STB TV 1. Run an RG6 coaxial cable from the antenna towards your television set. Connect the RG6 coaxial cable to the ANT jack on the supplied amplifier insert. 2. Connect built-in coaxial cable on the amplifier insert to the antenna input jack on your TV or converter box. Note: If you want to split the signal coming from the antenna, connect the short coaxial cable built into the amplifier insert to your splitter (splitter sold separately). DO NOT PUT THE SIGNAL SPLITTER BETWEEN THE AMPLIFIER INSERT AND THE ANTENNA. 3. After all other connections are made, connect the power adapter into the amplifier insert. Plug it into a standard AC outlet. Important: This power adapter should be plugged in so that it stays vertical or lays flat. The amplifier insert should always be located indoors. 11